{"product_id":"qbp866677","title":"Vimar 2P Polarized Axial Plug, 6A 24V SELV, 3 mm\/4 mm Pins, Ivory","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM01617 is a 2-pole polarized SELV plug for low-voltage circuits, rated 6A at 24V, with an axial cable entry and an integrated cord-grip.\u003c\/p\u003e\u003cp\u003eIt uses two different pin diameters, one 3 mm pin and one 4 mm pin, on a 12.4 mm centre-to-centre spacing. That polarization helps keep the connection oriented correctly when the plug is used on signal and telecommunication leads around the boat.\u003c\/p\u003e\u003cp\u003eThis plug is meant for SELV applications and is not suitable for mains AC circuits.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2P polarized SELV plug rated 6A \/ 24V for low-voltage signal and telecommunication connections\u003c\/li\u003e\n\u003cli\u003eOne 3 mm pin and one 4 mm pin to maintain polarity and prevent incorrect orientation\u003c\/li\u003e\n\u003cli\u003e12.4 mm distance between pin centres for matching the correct socket pattern\u003c\/li\u003e\n\u003cli\u003eAxial cable entry for straight, in-line cord routing where side-exit plugs would snag or bend\u003c\/li\u003e\n\u003cli\u003eBuilt-in cord-grip to add strain relief and reduce conductor movement from vibration\u003c\/li\u003e\n\u003cli\u003eCompatible with socket outlets 16301, 14331, 08159, and 10159\u003c\/li\u003e\n\u003cli\u003eIvory finish for a clean match with common portable installation components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eConfirm the mating socket is the polarized 2P SELV style that accepts the 3 mm and 4 mm pins on 12.4 mm centres. The plug is intended to mate with the listed compatible socket outlets, and it will not fit standard household, shore-power, or common 12V accessory outlets.\u003c\/p\u003e\u003cp\u003eCheck your circuit load against the 6A \/ 24V rating, especially on runs feeding multiple devices or longer portable leads where voltage drop can become noticeable.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe axial entry routes the cable straight out of the back of the plug, which helps when the lead needs to run neatly along a bulkhead, behind a panel, or through a cable pass-through. Use the cord-grip to clamp the outer jacket so the cable is supported by the plug body rather than the internal terminations.\u003c\/p\u003e\u003cp\u003eOn board, keep this type of low-voltage connection out of direct washdown spray and away from areas where water can sit. A simple drip loop on the cable run helps keep moisture from tracking into the plug or socket.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis plug makes sense for boats using dedicated SELV signal and telecommunication connections, such as portable leads for comms-related accessories or equipment that is connected and disconnected during service. It is also a good match for tidy, keyed connections at a nav station, electronics locker, or other dry interior area where correct orientation matters.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003ePeriodically check that the cord-grip is still tight and that the cable jacket has not pulled back. If the connection sees vibration or frequent plugging cycles, inspect the plug body and pins for looseness and clean any buildup before it becomes intermittent.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269503479989,"sku":"QBP866677","price":4.47,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300214_qbp866677.jpg?v=1771544325","url":"https:\/\/www.qualityboatparts.com\/products\/qbp866677","provider":"Quality Boat Parts","version":"1.0","type":"link"}