{"product_id":"qbp866565","title":"Vimar By-me Plus 4-Output Relay Actuator, 16A, 120-230V, DIN Rail","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM01471 is a multifunction programmable actuator that gives you four relay outputs for switching onboard loads. Each output is a 16 A change-over relay for 120-230 V~ circuits, so it can be set up for lighting, blind or shutter slat orientation, and fan-coil control when used within a compatible automation system.\u003c\/p\u003e\u003cp\u003eIt mounts on a standard DIN rail (60715 TH35) and takes up 4 modules of 17.5 mm each, which helps keep a panel layout predictable during refits or new builds. With an IP20 protection rating, it belongs inside a dry, enclosed electrical cabinet or distribution panel rather than anywhere exposed to spray, washdowns, or bilge moisture.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e4 programmable change-over relay outputs, rated 16 A per relay\u003c\/li\u003e\n\u003cli\u003eSwitching for 120-230 V~ circuits\u003c\/li\u003e\n\u003cli\u003eDIN rail installation (60715 TH35) with a 4-module footprint (4 x 17.5 mm)\u003c\/li\u003e\n\u003cli\u003eLocal push-buttons for on-unit operation and service checks\u003c\/li\u003e\n\u003cli\u003eBus connection for integration with the By-me home automation environment\u003c\/li\u003e\n\u003cli\u003eIP20 protection rating for installation inside protected panels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan for a DIN-rail position inside the boat’s electrical cabinet where wiring can be dressed cleanly and kept away from heat sources. The 4-module width makes it straightforward to line up alongside breakers, power supplies, and other DIN devices.\u003c\/p\u003e\u003cp\u003eThe local push-buttons are useful during commissioning and troubleshooting when you need to verify wiring and load response at the panel without relying on the automation interface.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis unit switches AC loads (120-230 V~) through change-over relay contacts. A change-over relay gives you both normally-open and normally-closed behavior from the same channel, which can matter when you need a default state or interlock behavior in a boat system.\u003c\/p\u003e\u003cp\u003eMatch each output to the real load current and how the load behaves at startup, then protect the circuit appropriately in the panel. Keep terminations tight and well-supported so vibration does not work connections loose over time.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eCommon uses include switching lighting circuits, driving paired outputs for blind or shutter movement with slat orientation functions, and controlling fan-coil stages within a networked control scheme. It is a good match for yachts that already use the By-me automation environment and want a DIN-rail relay module to bring multiple AC loads under centralized control while still keeping local access at the panel.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eBecause it is IP20, keep it in a clean, dry enclosure and avoid mounting locations where condensation or water ingress is likely. As part of routine electrical checks, re-torque terminals and inspect wiring support, especially after heavy-weather runs or long periods of vibration.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52269503185077,"sku":"QBP866565","price":245.78,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300208_qbp866565.jpg?v=1771544323","url":"https:\/\/www.qualityboatparts.com\/products\/qbp866565","provider":"Quality Boat Parts","version":"1.0","type":"link"}