{"product_id":"qbp831988","title":"i2Systems Apeiron A3101Z Screw-Mount LED Downlight, 3000K Warm White, IP67, Polished Chrome","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe i2Systems APL-2W-30K-PW11 is a round LED downlight that puts warm white light overhead with a screw-mount, removable-bezel design that suits tight mounting areas on boats.\u003c\/p\u003e\u003cp\u003eIt draws 2.5 W, throws a 90 degree beam, and keeps the back profile shallow at 1.34 in deep. The visible trim is 3.50 in round with a polished chrome finish that pairs well with stainless hardware and modern interiors.\u003c\/p\u003e\u003cp\u003eWith stainless steel construction, a titanium-coated trim bezel, and an IP67 rating, it holds up well in wet areas and during washdowns, but it is not meant for submersion.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eWarm white output (3000K) for cabins, hardtops, and cockpit lighting that stays comfortable on the eyes at night\u003c\/li\u003e\n\u003cli\u003e2.5 W draw to keep load low on battery-backed lighting circuits\u003c\/li\u003e\n\u003cli\u003e90 degree beam spread that works well for general overhead coverage\u003c\/li\u003e\n\u003cli\u003eScrew-mount installation with a removable bezel for service access and refits\u003c\/li\u003e\n\u003cli\u003e3.50 in round trim with a 1.34 in mounting depth for tighter overhead spaces\u003c\/li\u003e\n\u003cli\u003eStainless steel build with a titanium-coated trim bezel and polished chrome finish\u003c\/li\u003e\n\u003cli\u003eIP67-rated housing for spray and washdowns (not for submersible use)\u003c\/li\u003e\n\u003cli\u003eSimple 2-wire hookup that can be wired into an existing switched lighting run\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe screw-mount format is helpful where spring clips are awkward or where you want the bezel to come off cleanly for access later. It is a practical fit for hardtops, arches, cockpit liners, and pilot house overheads where mounting depth is limited.\u003c\/p\u003e\u003cp\u003eBefore drilling, confirm you have clearance behind the surface for the 1.34 in depth plus room for wiring and strain relief. In high-vibration spots, secure wiring so it cannot chafe on fiberglass edges or metal structure.\u003c\/p\u003e\u003ch6\u003eElectrical and system fit\u003c\/h6\u003e\u003cp\u003eThis light uses a straightforward 2-wire connection and is typically installed on a fused, switched low-voltage lighting circuit. Match polarity, keep connections sealed, and use proper strain relief anywhere the wiring may see moisture, vibration, or movement.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eWarm white light reads natural in cabins and under hardtops, and the 90 degree beam helps fill a space without the hot spots you get from narrower downlights. Common placements include hardtops, arches, cockpits, pilot houses, and courtesy lighting locations along steps and walkways.\u003c\/p\u003e\u003cp\u003eThis model makes the most sense when you want a small downlight with a shallow back profile and a polished chrome trim to match surrounding hardware.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt residue off the trim as part of regular washdowns, and avoid abrasive cleaners that can dull the finish. If mounted in a wet location, check the seal area and wiring connections occasionally to keep water from wicking into the wiring run.\u003c\/p\u003e","brand":"i2Systems","offers":[{"title":"Default Title","offer_id":52269716439221,"sku":"QBP831988","price":112.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1301105_qbp831988.jpg?v=1771545370","url":"https:\/\/www.qualityboatparts.com\/products\/qbp831988","provider":"Quality Boat Parts","version":"1.0","type":"link"}