{"product_id":"qbp793553","title":"B\u0026G Triton Edge Sailing Processor, For Triton\/Nemesis Displays","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe B\u0026amp;G 000-15134-001 is a Triton Edge sailing processor that sits on your boat’s network and turns sensor inputs into the sailing data you actually steer and trim by on compatible B\u0026amp;G displays and chartplotters. It powers from 12\/24 V DC systems (9.0–31.2 V DC) and draws up to 4 W, so it fits cleanly into typical nav electronics power distribution.\u003c\/p\u003e\u003cp\u003eOn board, it adds start line functions, true wind refinement, and correction tools for boat speed and wind that take heel and trim into account, helping keep targets and steering guidance more consistent as conditions change. The housing is rated IPX6 and IPX7 and is compact enough to mount near your nav hub while still keeping good access to cabling.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eWorks on 12\/24 V DC power systems (9.0–31.2 V DC), with a 1 A recommended fuse and up to 4 W maximum power consumption.\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 connectivity via Micro-C for sharing calculated sailing data with connected instruments and sensors.\u003c\/li\u003e\n\u003cli\u003eEthernet port (100BASE-T, 5-pin Ethernet connector) for network integration and access to the web interface.\u003c\/li\u003e\n\u003cli\u003eBuilt-in Wi-Fi (802.11 b\/g\/n) for onboard connectivity, including hotspot access for setup.\u003c\/li\u003e\n\u003cli\u003eStart line calculations plus boat speed and wind correction tools, including heel and trim compensation.\u003c\/li\u003e\n\u003cli\u003eRecords sailing data at a 1-second sampling rate, with export options in .gpx or .csv for post-sail review.\u003c\/li\u003e\n\u003cli\u003eIPX6 and IPX7 waterproof rating and an operating temperature range of -15°C to 55°C (5°F to 131°F).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis processor is intended for B\u0026amp;G systems where you want the sailing calculations available on Triton and Nemesis displays as well as Vulcan and Zeus chartplotters. It is most at home on boats already using NMEA 2000 sensors for wind, speed, heading, and related inputs, since the processor relies on network data quality for the best results.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the unit vertically with the cable exits facing down, and leave at least 15 cm (5.9 in) of clearance below the connectors so the cables can be installed and serviced without strain. Keep it at least 50 cm (20 in) from any magnetic compass, and avoid engine compartments where heat and electrical noise can make instrument systems harder to keep clean and stable.\u003c\/p\u003e\u003cp\u003eThe housing includes an earth-ground connection point intended to help bleed off static charge and protect the NMEA 2000 network, which is especially relevant when using wired masthead wind sensors. Power is supplied through the included power lead, while the NMEA 2000 drop and tee provide the network connection, and Ethernet can be used for linking into a larger nav network and for setup access.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eTriton Edge makes the most sense for sailors who want start line tools and refined wind and boat speed correction for racing, club racing, or performance-minded cruising, without changing out the rest of the network. It is also a practical fit for boats where you want to record and review sessions later, using the processor’s built-in data recording and export options.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTriton Edge sailing processor\u003c\/li\u003e\n\u003cli\u003eMounting screws\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 cable (0.6 m \/ 2 ft)\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 tee connector\u003c\/li\u003e\n\u003cli\u003eConnection details card\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"B\u0026G","offers":[{"title":"Default Title","offer_id":52269448560821,"sku":"QBP793553","price":1499.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300072_qbp793553.jpg?v=1771543973","url":"https:\/\/www.qualityboatparts.com\/products\/qbp793553","provider":"Quality Boat Parts","version":"1.0","type":"link"}