{"product_id":"qbp784097","title":"Lumitec Contour Inset Navigation Light, 10-30V DC, USCG 2nm, IP67, 2.66in Wide, 0.95in High, 1.32in Depth","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec Contour Series Inset Navigation Light is an inset-mount LED navigation light for hardtops, arches, and pilothouse faces where you want a flush install with no exposed fasteners. It runs on 10-30 V DC for 12 V or 24 V systems, with low current draw (18-26 mA at 12 V; 12-15 mA at 24 V).\u003c\/p\u003e\u003cp\u003eIt carries a USCG 2 nautical mile rating for vessels up to 50 m (165 ft) and conforms to ABYC A16. The inset footprint is compact at 2.67 in wide x 1.00 in high x 1.32 in deep, which helps when space is limited along a hardtop brow or cabin side.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eInset-mount profile sits cleanly in a hardtop or pilothouse face with no visible fasteners.\u003c\/li\u003e\n\u003cli\u003e10-30 V DC input range supports both 12 V and 24 V electrical systems.\u003c\/li\u003e\n\u003cli\u003eVery low current draw for always-ready navigation lighting without meaningful battery impact.\u003c\/li\u003e\n\u003cli\u003eUSCG 2 nautical mile rating for vessels up to 50 m (165 ft).\u003c\/li\u003e\n\u003cli\u003eConforms to ABYC A16 for navigation lighting installations.\u003c\/li\u003e\n\u003cli\u003eCompact housing size: 2.67 in W x 1.00 in H x 1.32 in D (inset mount).\u003c\/li\u003e\n\u003cli\u003eSimple two-wire connection (positive and negative) for standard on\/off nav light circuits.\u003c\/li\u003e\n\u003cli\u003eSnap-in light module interface allows the module to be seated into the housing with an audible click and removed from the back side when service access is available.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis light is offered in multiple configurations based on light color output.\u003c\/p\u003e\u003cp\u003eThe light color corresponds to the navigation function (port, starboard, or stern) while keeping the same inset mounting format and 10-30 V DC electrical range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e101575: Light color Green. Green output is used for the starboard-side navigation light position on standard marine lighting layouts.\u003c\/li\u003e\n\u003cli\u003e101574: Light color Red. Red output is used for the port-side navigation light position on standard marine lighting layouts.\u003c\/li\u003e\n\u003cli\u003e101576: Light color White. White output is used for the stern navigation light position on standard marine lighting layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInset installations depend on having a matching pocket or recess built into the mounting surface so the housing sits flush. Plan wire routing so the cable can pass through the center slot of the housing and land on a clean 10-30 V DC navigation-light feed with correct polarity.\u003c\/p\u003e\u003cp\u003eOnce wired, the light module seats into the housing by pressing the front face into place until the snaps engage. Service removal is done from the back side by accessing the snaps, so it helps to leave reasonable access behind the mounting surface for future work.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis light is a straightforward choice for boats with 12 V or 24 V DC systems that use standard switched navigation lighting circuits. It is commonly installed on hardtops, pilothouse faces, and arches where a flush look matters and where the light will not be obscured by railings, canvas, or deck hardware.\u003c\/p\u003e\u003cp\u003eBefore cutting or committing to a pocket, confirm you have the physical clearance for the 1.32 in depth plus wiring bend radius, and confirm you can orient the light correctly so the required navigation sectors remain unobstructed.\u003c\/p\u003e\u003ch6\u003eOn-board use\u003c\/h6\u003e\u003cp\u003eThis style of inset light is often seen on custom builds and clean refits that prioritize a finished exterior surface. It is a practical match for coastal cruising, night fishing runs, and offshore transits where you want compliant navigation lighting without adding bulky fixtures to the edges of the top.\u003c\/p\u003e\u003cp\u003eNavigation lights are typically installed as a system: red to port, green to starboard, and white at the stern depending on the vessel layout and lighting plan.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e101574\u003c\/span\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e101576\u003c\/span\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e101575\u003c\/span\u003e","brand":"Lumitec","offers":[{"title":"Red","offer_id":53773716717749,"sku":"QBP784097-V7","price":94.49,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":53773716750517,"sku":"QBP784097-V0","price":96.49,"currency_code":"USD","in_stock":false},{"title":"Green","offer_id":53773716783285,"sku":"QBP784097-V3","price":94.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/0371689_qbp784097_jpeg.jpg?v=1794690043","url":"https:\/\/www.qualityboatparts.com\/products\/qbp784097","provider":"Quality Boat Parts","version":"1.0","type":"link"}