{"product_id":"qbp740523","title":"Raymarine HyperVision Transducer Extension Cable, For HV-100 and HV-300, 4 m","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine A80562 is a 4 m HyperVision transducer extension cable for Raymarine HV series transducers. It adds 4 m of reach between the transducer and display, which helps when the cable path on the boat is longer than the standard lead allows. It is used with HyperVision installations and is not a general-purpose transducer extension.\u003c\/p\u003e\u003cp\u003eThis cable is used with HV series transducers, including HV-100 and HV-300 setups. The added length can make a difference on boats where the display is mounted farther forward, the cable has to pass through rigging tubes, or the run needs a cleaner route through the hull or console.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e4 m extension length, equal to 13.12 ft\u003c\/li\u003e\n\u003cli\u003eMade for Raymarine HV series HyperVision transducers\u003c\/li\u003e\n\u003cli\u003eWorks with HV-100 and HV-300 installations\u003c\/li\u003e\n\u003cli\u003eUseful when the display-to-transducer route is longer than the original cable allows\u003c\/li\u003e\n\u003cli\u003eOne extension is the recommended maximum in the cable run\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis extension cable is for HV series transducers only. It suits installations built around Raymarine HyperVision sonar where extra distance is needed between the transducer location and the display connection point.\u003c\/p\u003e\u003cp\u003eIt also fits split HV-300THP port and starboard transducer installations that use the matching Y-cable in the connection path to the display. If you are checking fit before purchase, the key point is that this is part of the HyperVision cabling system and should be matched to an HV series transducer setup.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis cable is useful when the transducer lead has to travel farther through a center console, pilothouse, or longer hull run. It gives more freedom when the display is mounted away from the transom or when the cable needs a cleaner path that avoids tight bends and awkward routing.\u003c\/p\u003e\u003cp\u003eFor best results, keep the cable run as short as the installation allows. One extension is the recommended maximum. On HV-100 installations, total cable length should stay within 10 m. On HV-300 installations, total cable run to each transducer should stay within 6.3 m.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a practical match for boat owners adding or relocating an Element HV display, refitting an older cable route, or cleaning up a new electronics install where the stock transducer lead comes up short. It matters most on boats where the sonar path is already defined by rigging channels, liners, or helm placement.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":52023807639733,"sku":"QBP740523","price":94.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330792_qbp740523.webp?v=1780191997","url":"https:\/\/www.qualityboatparts.com\/products\/qbp740523","provider":"Quality Boat Parts","version":"1.0","type":"link"}