{"product_id":"qbp712716","title":"Blue Sea Systems High Temp Temperature Sensor, IP65, -40°F to 300°F, 18 in Wire","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1821 is a high-temperature sensor for monitoring raw water exhaust temperature on a boat without drilling into the pipe. It mounts on the outside of the surface being monitored and works with Blue Sea Systems products that accept a temperature sensor, including the P12 Charger, M2 OLED, and Mini OLED meters.\u003c\/p\u003e\u003cp\u003eIts sensing range runs from -40°F to 300°F (-40°C to 150°C), which makes it useful anywhere a standard low-temperature probe would not be enough. The sensor has an 18-inch lead for short routing runs near the monitored point, and its IP65 construction is suited to wet onboard spaces that see spray and washdown water, but not full submersion.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMeasures from -40°F to 300°F (-40°C to 150°C) for higher-heat monitoring points such as raw water exhaust\u003c\/li\u003e\n\u003cli\u003eExternal surface-mount setup lets you monitor exhaust temperature without drilling into the hose or pipe\u003c\/li\u003e\n\u003cli\u003eCompatible with Blue Sea Systems products that require a temperature sensor, including P12 Charger, M2 OLED, and Mini OLED meters\u003c\/li\u003e\n\u003cli\u003eIP65-rated body handles water spray and washdown conditions, but it is not a submersible sensor\u003c\/li\u003e\n\u003cli\u003e18-inch lead helps with short, tidy cable runs in engine spaces and nearby monitoring locations\u003c\/li\u003e\n\u003cli\u003eNon-polarized leads connect in either order, which keeps wiring straightforward during installation\u003c\/li\u003e\n\u003cli\u003eMultiple mounting options, including included double-sided tape, a through-hole for a #8 screw, or a hose clamp on the outside of a pipe\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis sensor is meant to read temperature from the outside of the component you are watching, not from inside the fluid path. On a raw water exhaust run, it can be strapped to the outside of the pipe or hose so you can track temperature changes without opening the system.\u003c\/p\u003e\u003cp\u003eFor a fixed mount, the through-hole accepts a #8 screw. For pipe mounting, a hose clamp can be used to hold the sensor against the outside surface. The included double-sided tape is useful on a clean, dry mounting point when a clamp or screw is not the better fit.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a good match for boats that already use a Blue Sea Systems charger or display with a temperature-sensor input and need a remote sensor at the engine space or another hot surface. Before ordering, check that the 18-inch lead will comfortably reach the connection point on your charger or meter, especially if the display is mounted away from the area being monitored.\u003c\/p\u003e\u003cp\u003eBecause it is a high-temperature, non-submersible sensor, it fits dry-contact surface sensing better than applications where the probe needs to sit underwater or inside a tank. That makes it especially practical for engine-room monitoring where spray, heat, and vibration are part of normal use.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTemperature sensor\u003c\/li\u003e\n\u003cli\u003eDouble-sided tape\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023077077173,"sku":"QBP712716","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329921_qbp712716.jpg?v=1780191667","url":"https:\/\/www.qualityboatparts.com\/products\/qbp712716","provider":"Quality Boat Parts","version":"1.0","type":"link"}