{"product_id":"qbp678586","title":"Garmin USB Card Reader, Dual SD Slots, Flush Mount, IPX7, USB-C Adapter Cable","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-02251-10 is a flush-mount USB SD card reader that brings chart cards and update media out to an easy-to-reach spot at the helm. It accepts up to two full-size SD cards for quick access to charts, software updates, and ActiveCaptain data.\u003c\/p\u003e\u003cp\u003eThe housing is fully gasketed and rated IPX7 for incidental water exposure, and the body measures 50.8 x 50.8 x 61 mm (2 x 2 x 2.4 in.) excluding the cable. It runs on 4.75 to 5.25 Vdc, uses up to 2.5 W at 5 Vdc, and is specified for operation from -15 to 70°C (5 to 158°F).\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHolds up to two full-size SD cards so chart regions and update cards can stay loaded and easy to swap.\u003c\/li\u003e\n\u003cli\u003eFlush-mount form factor with a 2 in x 2 in face footprint for clean installs on crowded dashes.\u003c\/li\u003e\n\u003cli\u003eIPX7 water rating and fully gasketed, high-impact plastic construction for wet helm environments.\u003c\/li\u003e\n\u003cli\u003eConnects to a compatible chartplotter via USB; an included USB-C adapter supports GPSMAP 9000 series installations.\u003c\/li\u003e\n\u003cli\u003eElectrical specs: 4.75 to 5.25 Vdc input, 100 mA typical draw at 5 Vdc, 500 mA max draw at 5 Vdc (2.5 W max).\u003c\/li\u003e\n\u003cli\u003eCompass-safe distance of 53.3 cm (21 in.) to help avoid magnetic compass interference.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting spot so the SD slots are reachable when you need to load charts or run updates. For a typical flush install, the cutout is made with a 38 mm (1 1\/2 in.) hole saw, then the unit is secured with two screws after drilling 2.7 mm (3\/32 in.) pilot holes.\u003c\/p\u003e\u003cp\u003eRoute the cable with a little slack, keep it away from known interference sources, and install the ferrite bead near the connector. Maintain at least 53.3 cm (21 in.) of separation from a magnetic compass.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis accessory operates on 5 Vdc (4.75 to 5.25 Vdc) and includes an in-line 7.5 A, 42 V fast-acting fuse in the power lead. Keep the fuse holder in place, and follow standard marine practice for protected wiring runs and clean grounds.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe reader connects to the USB port on a compatible chartplotter to make SD cards easier to access at the helm. A USB-C adapter is included for installations that require USB-C, such as GPSMAP 9000 series units.\u003c\/p\u003e\u003cp\u003eThis is a good match for boaters who update charts regularly, move between regions, or prefer not to pull a display just to reach a card slot. It also helps when the back of the helm is tight or hard to reach once the electronics are installed.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eUSB card reader\u003c\/li\u003e\n\u003cli\u003eUSB-C adapter cable\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269423034549,"sku":"QBP678586","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299892_qbp678586.jpg?v=1771543811","url":"https:\/\/www.qualityboatparts.com\/products\/qbp678586","provider":"Quality Boat Parts","version":"1.0","type":"link"}