{"product_id":"qbp646828","title":"Jabsco Continuous Duty Flangemount Blower, 4 in, 115V AC, 250 CFM","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Jabsco 36760-0115 is a 4-inch continuous-duty flangemount blower for 115V AC ventilation systems, rated at 250 CFM. It is made for moving air through equipment spaces and other enclosed areas where steady AC-powered airflow is needed, including diesel engine room ventilation when the space does not contain gasoline fumes or other flammable vapors.\u003c\/p\u003e\u003cp\u003eThis blower uses an extended life induction motor with thermal overload protection and a reinforced thermoset plastic housing. The flangemount layout lets the discharge side mount directly to a flat bulkhead or exterior surface, which helps keep duct runs shorter and cleaner in tight machinery spaces.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e4-inch flangemount blower with 250 CFM airflow for equipment space ventilation and general air circulation.\u003c\/li\u003e\n\u003cli\u003e115V AC motor suits vessels and installations where AC power is preferred over DC blower operation.\u003c\/li\u003e\n\u003cli\u003eContinuous-duty motor supports longer ventilation cycles than intermittent-duty blower models.\u003c\/li\u003e\n\u003cli\u003eThermal overload protection helps protect the motor during demanding operating conditions.\u003c\/li\u003e\n\u003cli\u003eReinforced thermoset plastic housing keeps the blower body practical for marine installation areas.\u003c\/li\u003e\n\u003cli\u003eSlip-on inlet duct connection works with duct hose routed from the space that needs ventilation.\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant materials throughout help the unit stand up to damp marine environments.\u003c\/li\u003e\n\u003cli\u003eNot ignition protected, so it must not be used to exhaust gasoline fumes or installed where flammable vapors may be present.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe blower housing flange should be mounted on a flat bulkhead surface, with the discharge port fastened directly to the mounting surface. The inlet side can then be connected to duct hose leading to the compartment or equipment area that needs airflow.\u003c\/p\u003e\u003cp\u003eA location that stays dry and cool will help extend motor life. Keep the blower away from direct spray, deck wash, and unnecessary heat, and route ducting with as few restrictions as practical so the blower can move air efficiently.\u003c\/p\u003e\u003ch6\u003eCompatibility and safety\u003c\/h6\u003e\u003cp\u003eThis is a 115V AC blower, not a 12V or 24V DC blower. Confirm that the vessel or equipment installation has the correct AC circuit, overcurrent protection, switching, and grounding arrangement before installation.\u003c\/p\u003e\u003cp\u003eBecause this blower is not ignition protected, it is not suitable for gasoline engine compartments, fuel spaces, or any area that may contain flammable vapors. For diesel-powered engine room ventilation, it should only be used where the installation matches the vessel’s safety requirements and the compartment conditions are appropriate.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis blower is a practical match for boats that need continuous AC-powered airflow in machinery spaces, equipment rooms, or other enclosed compartments. It also suits dockside or generator-supported ventilation setups where steady air movement is more important than short intermittent blower cycles.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eInspect the blower and ducting periodically for loose fasteners, blocked hose runs, salt buildup, and signs of heat or moisture exposure. Keeping the inlet path clear and the mounting area dry helps preserve airflow and reduces strain on the motor.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":52715831165109,"sku":"QBP646828","price":539.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1340895_qbp646828.webp?v=1781720236","url":"https:\/\/www.qualityboatparts.com\/products\/qbp646828","provider":"Quality Boat Parts","version":"1.0","type":"link"}