{"product_id":"qbp632309","title":"Blue Sea Systems SMS Enclosure Gland, PG7, for #14 to #10 Wire","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 3124 is a small PG7 cable gland for one #14 to #10 wire in the SMS Surface Mount System. It fits cable outside diameters from 0.114 to 0.250 in. (2.9 to 6.4 mm) and uses a 0.492 in. (12.5 mm) clearance hole, so it is sized for small single-wire entries rather than larger jacketed cable runs.\u003c\/p\u003e\u003cp\u003eThis gland is used when a single conductor needs to pass through the wall of an SMS enclosure without leaving a loose opening around the wire. In marine electrical work that matters when the enclosure is mounted in places such as a machine space, lazarette, or shore cord storage compartment, where the cable entry needs to stay controlled and properly sealed. It is used with Blue Sea Systems SMS enclosure applications including part numbers 3116 and 3119.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePG7 gland sized for one #14 to #10 wire.\u003c\/li\u003e\n\u003cli\u003eAccepts cable outside diameters from 0.114 to 0.250 in. (2.9 to 6.4 mm).\u003c\/li\u003e\n\u003cli\u003eRequires a 0.492 in. (12.5 mm) clearance hole for nonthreaded mounting.\u003c\/li\u003e\n\u003cli\u003eCompact body with 1.17 in. (29.7 mm) max overall length for enclosure installations with limited wall depth.\u003c\/li\u003e\n\u003cli\u003e0.59 in. (15.0 mm) wrenching flats for tightening during installation.\u003c\/li\u003e\n\u003cli\u003eUsed with Blue Sea Systems SMS enclosure setups, including 3116 and 3119.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFit depends on cable outside diameter as much as conductor gauge. A wire may fall in the #14 to #10 range and still be too large or too small at the jacket for this gland, so the cable OD window of 0.114 to 0.250 in. is the measurement that matters most when confirming the seal. This version is for a single wire pass-through, not a bundled cable entry.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eFor SMS enclosure work, the gland is installed after drilling the correct clearance hole and tightening the sealing nut around the wire entry. Keeping gland entries on the bottom side of the enclosure is the usual approach on SMS installations because it helps preserve the enclosure seal as the cable run drops into the box.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis part makes sense for refits, service work, and panel changes where an SMS enclosure needs one more single-conductor entry without opening a larger cable hole than necessary. It is a good fit for boat owners and installers working on Blue Sea SMS enclosures in utility spaces where clean wire routing and a sealed pass-through matter.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52023066165429,"sku":"QBP632309","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329788_qbp632309.jpg?v=1780191644","url":"https:\/\/www.qualityboatparts.com\/products\/qbp632309","provider":"Quality Boat Parts","version":"1.0","type":"link"}