{"product_id":"qbp629579","title":"MotorGuide Mounting Isolator Kit, 4-Pack, Stainless Steel Bolts","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe MotorGuide MGA015PB6 is a mounting isolator kit that helps absorb shock and cut down vibration when you bolt marine accessories in place. It is commonly used for trolling motor mounts and other deck mounted hardware where vibration can work fasteners loose over time and where you want a cleaner install without needing full access under the deck or behind the console.\u003c\/p\u003e\u003cp\u003eThe kit uses rubber isolators with a molded-in nut and stainless steel bolts. As the bolts are tightened, the isolators expand into a mushroom shape under the mounting surface, helping the mount clamp down securely while the rubber takes the edge off impacts and vibration.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRubber isolators help reduce vibration transfer into mounted electronics and accessories.\u003c\/li\u003e\n\u003cli\u003eMolded-in nut in each isolator simplifies tightening from the topside.\u003c\/li\u003e\n\u003cli\u003eIsolator expands into a mushroom shape as it is tightened to help hold the mount in place.\u003c\/li\u003e\n\u003cli\u003eUseful for installs with limited underside access under decks or behind consoles.\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting bolts included for a clean bolt-through installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e4 rubber isolators\u003c\/li\u003e\n\u003cli\u003e4 stainless steel bolts\u003c\/li\u003e\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eLay out the mount, bracket, or accessory base and confirm your hole pattern and clearance before drilling. Insert the rubber isolators through the mounting holes, start the stainless bolts, then tighten until the rubber mushrooms under the surface and the assembly feels firm. The goal is a stable clamp with the rubber still doing its job, not crushing the isolator.\u003c\/p\u003e\u003cp\u003eAfter the first run, recheck fastener tightness. Vibration and deck materials can settle slightly, especially on the first outing after installation.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis kit is intended for bolt-through mounting applications where you want some isolation between the mount and the boat structure. It is a good match for trolling motor mounts and many other marine accessories that use standard bolts and washers for deck mounting. Confirm your deck thickness, hole size, and the space available below the mounting surface so the isolators can expand properly.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eIt is a practical choice for bass boats, bay boats, and center consoles where you are installing gear on the bow deck or near the console and access is tight. It can also be helpful on boats that see chop regularly and where sensitive electronics benefit from reduced shock transfer.\u003c\/p\u003e\u003ch6\u003eMaterials and corrosion resistance\u003c\/h6\u003e\u003cp\u003eThe isolators are rubber and the fasteners are stainless steel. The rubber helps isolate vibration at the mounting points while the stainless hardware suits typical wet, salt, and washdown conditions when installed with normal marine best practices.\u003c\/p\u003e\u003ch6\u003eSafety information\u003c\/h6\u003e\u003cp\u003eWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003eMGA015PB6\u003c\/span\u003e","brand":"MotorGuide","offers":[{"title":"Default Title","offer_id":53721538789557,"sku":"QBP629579","price":21.36,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1280717_qbp629579.jpg?v=1794117280","url":"https:\/\/www.qualityboatparts.com\/products\/qbp629579","provider":"Quality Boat Parts","version":"1.0","type":"link"}