{"product_id":"qbp626522","title":"Lopolight 200-012 Series 360 Degree LED Anchor Light, 2NM, 10-32VDC, IP68, Horizontal Mount","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lopolight 200-012 Series anchor light is a white all-round anchor light for horizontal mounting with 2 nautical mile visibility and a 10 to 32 VDC operating range.\u003c\/p\u003e\u003cp\u003eIt is specified for vessels up to 164 ft (50 m) and uses an LED light source in an anodized aluminum housing with an IP68 rating for exposure to spray and washdowns.\u003c\/p\u003e\u003cp\u003eA 2.3 ft (0.7 m) cable is fitted for wiring into your anchor-light circuit, and it meets U.S.C.G., EN14744, and COLREG72 requirements.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2 NM all-round white anchor light, specified for vessels up to 164 ft (50 m)\u003c\/li\u003e\n\u003cli\u003eHorizontal mount format for hardtops, cabin roofs, mast platforms, and similar flat surfaces\u003c\/li\u003e\n\u003cli\u003e10 to 32 VDC input suited to both 12V and 24V systems\u003c\/li\u003e\n\u003cli\u003eLED light source (single LED)\u003c\/li\u003e\n\u003cli\u003eIP68-rated housing for heavy weather exposure and washdowns\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum housing with an HDPE circular baseplate\u003c\/li\u003e\n\u003cli\u003e2.3 ft (0.7 m) attached cable for straightforward connection to a switched circuit\u003c\/li\u003e\n\u003cli\u003eMeets U.S.C.G., EN14744, and COLREG72 requirements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis series is offered in multiple configurations, with finish and style as the main differences.\u003c\/p\u003e\u003cp\u003eFinish changes the exterior color, and style indicates standard operation or a version that supports strobe operation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e201-012-FB: Finish Silver, Style Standard. A clean silver look that blends well with many aluminum and stainless topside fittings.\u003c\/li\u003e\n\u003cli\u003e201-012-FB-B: Finish Black, Style Standard. A dark finish that pairs naturally with black rails, antennas, and hardtop hardware.\u003c\/li\u003e\n\u003cli\u003e201-012S-FB: Finish Silver, Style Strobe. The strobe style is used when a flashing mode is required alongside the standard configuration choice.\u003c\/li\u003e\n\u003cli\u003e201-012S-FB-B: Finish Black, Style Strobe. Combines the black exterior finish with the strobe style option for matching darker topside layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNavigation light with 2.3 ft (0.7 m) cable\u003c\/li\u003e\n\u003cli\u003eHDPE circular baseplate\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the light on a solid, horizontal surface where it has an unobstructed 360 degrees of visibility. Common locations include a hardtop, pilothouse roof, or a mast platform on sailboats. Use the supplied baseplate and hardware, and bed fasteners as appropriate for your mounting surface to keep water out of the core.\u003c\/p\u003e\u003cp\u003eRoute the cable away from heat sources and moving gear, then connect it to a properly fused 10 to 32 VDC anchor-light circuit. If your helm uses a combined navigation and anchor switch, confirm the wiring supports independent anchor-light operation when needed.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is an all-round white anchor light intended for installations that need 2 NM visibility and compliance with COLREG72 rules. The 10 to 32 VDC range covers typical 12V and 24V onboard power without a separate voltage converter.\u003c\/p\u003e\u003cp\u003eBefore drilling, confirm the chosen spot is not shaded by antennas, radar, outriggers, or rigging, and that the cable route can be kept protected through the headliner, mast wiring channel, or a dedicated chase.\u003c\/p\u003e\u003ch6\u003eMaterials and environmental protection\u003c\/h6\u003e\u003cp\u003eThe anodized aluminum housing and IP68 rating suit exposed mounting locations where salt spray, UV, and vibration are normal. For mixed-metal installations, isolate contact points where practical and rinse salt residue during routine washdowns.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis style of light is commonly used on coastal cruising boats that anchor overnight and want a clear, compliant all-round white indication from a compact, horizontal-mount unit. It also fits boats with limited vertical clearance on hardtops or pilothouse roofs where a low-profile mount keeps the light out of the way.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse with fresh water and mild soap, and avoid abrasive pads on the lens and finish. During seasonal checks, confirm the fasteners remain tight, inspect the cable entry for movement, and look for corrosion at connections, especially after long periods in saltwater environments.\u003c\/p\u003e","brand":"Lopolight","offers":[{"title":"Silver \/ Standard","offer_id":52271525593269,"sku":"QBP626522-V1","price":679.33,"currency_code":"USD","in_stock":true},{"title":"Black \/ Standard","offer_id":52271525626037,"sku":"QBP626522-V2","price":679.33,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Strobe","offer_id":52271525658805,"sku":"QBP626522-V3","price":952.29,"currency_code":"USD","in_stock":true},{"title":"Black \/ Strobe","offer_id":52271525691573,"sku":"QBP626522-V4","price":952.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1309296_qbp626522.png?v=1771555198","url":"https:\/\/www.qualityboatparts.com\/products\/qbp626522","provider":"Quality Boat Parts","version":"1.0","type":"link"}