{"product_id":"qbp620651","title":"Lopolight Bi-Color Sidelight, 1nm, Vertical Mount, 10-32VDC, IP68","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lopolight 101-004 Series is a 1 NM combined red and green navigation sidelight for vertical mounting on vessels up to 12 m (39.4 ft). It replaces separate port and starboard sidelights with one fixture, showing 112.5 degrees red and 112.5 degrees green for a 225 degree total arc. Power is 10 to 32 VDC, so it fits both 12V and 24V systems.\u003c\/p\u003e\u003cp\u003eThe housing is aluminum with an anodized finish, paired with a PMMA lens, and the unit is sealed to IP68 for wet bow installations and washdowns. Overall size is 74.55 x 28 x 73.16 mm and weight is 0.49 kg (17.28 oz), which keeps the load modest on pulpits and thin vertical faces where space is tight.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCombined port and starboard light in one fixture (red and green sectors), covering 225 degrees total (112.5 degrees per side).\u003c\/li\u003e\n\u003cli\u003e1 nautical mile visibility rating for vessels under 12 m (39.4 ft).\u003c\/li\u003e\n\u003cli\u003eRuns on 10 to 32 VDC; current draw is 87 mA at 12V and 48 mA at 24V (power draw 1.4 W).\u003c\/li\u003e\n\u003cli\u003eIP68 sealing and an operating temperature range of -25 C to 55 C for exposed, spray-heavy mounting locations.\u003c\/li\u003e\n\u003cli\u003eAluminum body with an anodized finish (varies by variant) and a PMMA lens; hardware is specified as A4 stainless steel.\u003c\/li\u003e\n\u003cli\u003eSupplied with a 2.5 m shielded cable made for marine use; minimum feed wire gauge is 0.5 mm2 (AWG 22).\u003c\/li\u003e\n\u003cli\u003eApproved to COLREG72, EN14744, IEC 60945, IACS E10, and USCG (among others listed for this light family).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis light is offered in multiple finish options while keeping the same size, mounting style, light colors, and electrical range.\u003c\/p\u003e\u003cp\u003eThe finish mainly affects how it blends with your bow, pulpit, and deck hardware. The optical coverage and wiring requirements stay consistent across the series.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e101-004: Finish in silver anodized aluminum. A common match for stainless hardware, aluminum rails, and lighter gelcoat.\u003c\/li\u003e\n\u003cli\u003e101-004-B: Finish in black anodized aluminum. A clean fit with dark hull sides, black rails, and tinted windshields.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1 navigation light, pre-cabled with a 2.5 m shielded marine-grade cable\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the unit on a vertical surface where the lens has a clear view forward and to both sides, with no shadowing from bow rails, anchor rollers, or a headsail furler. Take a moment to sight lines from the bow and make sure the light is level so the red and green sectors sit where they should when the boat is loaded.\u003c\/p\u003e\u003cp\u003eThe pre-attached cable is typically routed into the forepeak or behind the anchor locker liner. Use a watertight pass-through and leave a drip loop so water does not track along the cable into the boat.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis is a two-wire connection on a 10 to 32 VDC supply, so it works on 12V and 24V panels without a converter. With low current draw, it fits comfortably on standard navigation-light circuits, but it should still be protected by the correct fuse or breaker for your boat wiring plan.\u003c\/p\u003e\u003cp\u003ePlan the cable run to avoid chafe and keep connections in a dry spot when possible. If you extend the cable, keep the shielding continuous and maintain good sealing at all splices.\u003c\/p\u003e\u003ch6\u003eCompliance and on-board use\u003c\/h6\u003e\u003cp\u003eThe light is approved to COLREG72 and related marine standards for navigation lighting, with a 1 NM rating for boats under 12 m. It is a good match for small powerboats, RIBs, and sailboats that want a single combined bow light to simplify mounting and reduce holes in the hull or deck while staying within the limits for this size class.\u003c\/p\u003e","brand":"Lopolight","offers":[{"title":"Silver","offer_id":52271525298357,"sku":"QBP620651-V1","price":498.32,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":52271525331125,"sku":"QBP620651-V2","price":498.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1309278_qbp620651.png?v=1771555195","url":"https:\/\/www.qualityboatparts.com\/products\/qbp620651","provider":"Quality Boat Parts","version":"1.0","type":"link"}