{"product_id":"qbp619337","title":"Lopolight Combined Sidelight, 1NM, FB Base, 10-32V, IP68, Horizontal Mount","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lopolight 101-003 Series is a combined red\/green sidelight that gives you both port and starboard sectors in one fixture, rated for 1 nautical mile on vessels up to 12 m (39.4 ft).\u003c\/p\u003e\u003cp\u003eIt runs on 10 to 32 VDC, so it fits common 12 V and 24 V systems, drawing about 1.4 W (around 87 mA at 12 V or 48 mA at 24 V). The FB flat base is made for horizontal mounting, with a Ø92.5 mm footprint and a low profile of about 36 mm.\u003c\/p\u003e\u003cp\u003eSealing is IP68 for heavy spray and washdowns, with an operating temperature range of -25°C to 55°C. Approvals include COLREG72, EN14744, IEC 60945, IACS E10, and USCG.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCombined red\/green sidelighting in one housing with 2 x 112.5° sectors for bow centerline installations\u003c\/li\u003e\n\u003cli\u003e1 NM visibility for leisure vessels up to 12 m (39.4 ft)\u003c\/li\u003e\n\u003cli\u003e10 to 32 VDC input for 12 V and 24 V systems, with 1.4 W draw (approx. 87 mA at 12 V or 48 mA at 24 V)\u003c\/li\u003e\n\u003cli\u003eIP68 sealing for exposure on deck, plus -25°C to 55°C operating range\u003c\/li\u003e\n\u003cli\u003eFB flat base for horizontal mounting with a Ø92.5 mm footprint and about 36 mm overall height\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum housing with a PMMA lens and A4 stainless steel screws\u003c\/li\u003e\n\u003cli\u003ePre-cabled with a 2.5 m shielded marine-grade lead; minimum feed wire gauge 0.5 mm2 (AWG22)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis light is offered in two housing finishes. Both versions are the same 1 NM combined red\/green sidelight with an FB flat base for horizontal mounting, pre-cabled with a 2.5 m lead.\u003c\/p\u003e\u003cp\u003eThe finish mainly changes the look on deck and how the light blends with rails, pulpits, and nearby hardware.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e101-003-FB: Finish Silver. Silver anodized housing with a 20 µ anodized layer for a bright metal look that matches common stainless and aluminum fittings.\u003c\/li\u003e\n\u003cli\u003e101-003-FB-B: Finish Black. Black anodized housing with a 50 µ anodized layer to suit darker hardware and reduce visual contrast on modern topsides.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eAs a combined sidelight, this unit is typically mounted on the vessel centerline where it has a clear, unobstructed view forward and to both sides. Keep the lens faces clear of pulpit tubing, anchor gear, bow rails, or canvas that could block the red or green sector.\u003c\/p\u003e\u003cp\u003eThe flat base format supports horizontal mounting on a deck, cabin top, or a purpose-built bracket. Allow enough access to route and protect the cable where it passes through or under the mounting surface.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eConnect the pre-cabled 2.5 m shielded lead to your navigation light switch circuit within a 10 to 32 VDC supply. Use marine-grade connections, support the cable so it is not carrying strain at the base, and keep splices out of standing water when possible.\u003c\/p\u003e\u003cp\u003eWith low current draw, it is a good fit for small boats that run lights for long stretches at night or during limited battery operation. The minimum feed wire gauge is 0.5 mm2 (AWG22).\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis style of combined sidelight is a practical match for small powerboats, RIBs, and compact sailboats where you want one low-profile fixture at the bow rather than two separate sidelights on the rails. It is also useful when you want clean wiring and fewer deck penetrations.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt spray off the housing and lens during regular washdowns, and wipe the lens with a soft cloth to avoid hazing. Periodically check that the mounting screws stay snug and that the cable jacket is not chafed where it passes through the deck or bracket.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1 combined red\/green sidelight with FB flat base and 2.5 m shielded marine-grade cable\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lopolight","offers":[{"title":"Silver","offer_id":52271525036213,"sku":"QBP619337-V1","price":498.32,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":52271525068981,"sku":"QBP619337-V2","price":498.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1309269_qbp619337.png?v=1771555206","url":"https:\/\/www.qualityboatparts.com\/products\/qbp619337","provider":"Quality Boat Parts","version":"1.0","type":"link"}