{"product_id":"qbp613739","title":"Garmin 60A Circuit Breaker, For Force Kraken and Force Trolling Motors","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12832-40 is a 60A circuit breaker for the trolling motor power circuit when installing a Force or Force Kraken trolling motor. It sits in-line on the main feed so an overload or short can trip the circuit before heat builds in the cable run or at the connections.\u003c\/p\u003e\u003cp\u003eOn a boat, this is the kind of protection that belongs close to the trolling motor battery bank, where it can protect the full length of the power leads running up to the motor. If the circuit ever trips, it also gives you a clear starting point for troubleshooting the wiring, connectors, and battery setup before putting the motor back under load.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e60A circuit breaker sized for Garmin Force and Force Kraken trolling motor installations.\u003c\/li\u003e\n\u003cli\u003ePlaced in the main trolling motor power feed to interrupt the circuit during an overcurrent event.\u003c\/li\u003e\n\u003cli\u003eUseful as a dedicated protection point for a high-current trolling motor circuit, rather than relying on smaller accessory protection.\u003c\/li\u003e\n\u003cli\u003eUPC: 753759246495.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall the breaker in-line on the positive feed for the trolling motor power circuit, as close to the trolling motor battery bank as practical. Use cable that is sized for the motor’s current draw, support the run so it cannot chafe with vibration, and keep it clear of sharp edges, hinges, and the trolling motor mount’s moving parts.\u003c\/p\u003e\u003cp\u003eAfter installation, put the motor under load at the dock and feel the breaker and cable lugs for unusual warmth. Heat at the terminals is usually a connection or cable-sizing issue, not a normal operating condition.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis breaker is intended for Garmin Force and Force Kraken trolling motors. For other high-draw equipment on board, match the breaker type and rating to the specific device requirements and the cable size used in that circuit.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for anglers rigging a new Force setup, replacing a breaker during a rewire, or standardizing protection when you move batteries or reconfigure the trolling motor wiring. It also makes sense on boats that see frequent trailering or deck work where the trolling motor power circuit is often handled during rigging.\u003c\/p\u003e\u003ch6\u003eMaintenance and troubleshooting\u003c\/h6\u003e\u003cp\u003eIf the breaker trips repeatedly, treat it as a sign to inspect the full circuit before resetting and running again. Look for pinched or chafed power leads at the mount, corrosion at lugs and connectors, and battery issues that cause excessive current draw under load.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269469466805,"sku":"QBP613739","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299959_qbp613739.jpg?v=1771544102","url":"https:\/\/www.qualityboatparts.com\/products\/qbp613739","provider":"Quality Boat Parts","version":"1.0","type":"link"}