{"product_id":"qbp611557","title":"Lopolight 201-013 Towing Light, 2NM, 135° Yellow Light, 10-32VDC, IP68, FB Flat Base","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lopolight 201-013 Series is a 2 NM towing light that shows a 135° yellow (amber) sector and runs on 10 to 32 VDC systems. It is built for vessels in the 20 to 50 m range and is meant for horizontal mounting at the stern where a towing light is required.\u003c\/p\u003e\u003cp\u003eAll versions use an IP68-sealed housing and come pre-cabled with a 2.5 m shielded marine-grade lead for a clean install through the deck or a mount. The round body measures Ø92.5 mm, with a lower profile single-stack option (36 mm height) and a taller double-stack option (58 mm height).\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2 nautical mile visibility with a 135° yellow towing sector\u003c\/li\u003e\n\u003cli\u003eWide input voltage: 10 to 32 VDC for 12 V and 24 V systems\u003c\/li\u003e\n\u003cli\u003eLow power draw: 1.7 W (typical 124 mA at 12 VDC, 71 mA at 24 VDC)\u003c\/li\u003e\n\u003cli\u003eIP68-rated sealing for exposed stern installations and routine washdowns\u003c\/li\u003e\n\u003cli\u003eØ92.5 mm body; 36 mm height on single-stack and 58 mm height on double-stack versions\u003c\/li\u003e\n\u003cli\u003eFB flat-base mounting system for horizontal installs with centered cable routing\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum housing with a PMMA lens and A4 stainless fasteners\u003c\/li\u003e\n\u003cli\u003eApproved to COLREG72, EN14744, IEC 60945, IACS E10, USCG, ABS, M.E.D., DNV, and LR\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis light is offered in multiple configurations to match finish preferences and available mounting height.\u003c\/p\u003e\u003cp\u003eAcross the range, the output is a 2 NM, 135° yellow towing light for 10 to 32 VDC systems with IP68 sealing and a 2.5 m pre-cabled lead. Finish (silver or black) and stack style (single or double) are the differences between the options.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e201-013-FB: Finish Silver, Style Single Stack. Uses the lower 36 mm body height when you need a towing light with less vertical profile at the mount.\u003c\/li\u003e\n\u003cli\u003e201-013-FB-B: Finish Black, Style Single Stack. Matches darker hardware and paint schemes while keeping the same lower-profile footprint.\u003c\/li\u003e\n\u003cli\u003e201-013ST-FB: Finish Silver, Style Double Stack. Adds height (58 mm) for installations where a stacked form factor is required and there is more clearance above the mounting surface.\u003c\/li\u003e\n\u003cli\u003e201-013ST-FB-B: Finish Black, Style Double Stack. Keeps the taller stacked form factor while matching black anodized hardware and fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a dedicated towing light (yellow) with a 135° sector, intended for stern positioning where towing signals are required. Confirm your vessel length, your required light configuration, and the mounting height you have available before selecting single-stack or double-stack.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe FB flat base is intended for horizontal mounting and routes the cable through the center for a clean run into the structure. Plan your cable path, seal any deck penetration properly, and mount the light where it has an unobstructed 135° sector over the stern.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eWire the unit to a protected 10 to 32 VDC navigation-light circuit and keep connections sealed in the stern environment. With a typical 1.7 W draw, it is easy to integrate on vessels that run long hours at night without adding meaningful load to the DC system.\u003c\/p\u003e\u003ch6\u003eMaterials and environmental protection\u003c\/h6\u003e\u003cp\u003eThe housing is anodized aluminum with a PMMA lens and stainless fasteners, and the assembly is rated IP68 to keep water out in wet, vibrating, saltwater conditions. Rinse salt buildup during routine washdowns and check fasteners as part of normal lighting inspections.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNavigation light with attached 2.5 m shielded marine-grade cable\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis light is a solid match for larger yachts and commercial vessels that tow and need a compliant 2 NM towing light at the stern. It also suits owners who want a low-draw LED towing light with a compact round footprint and a choice of silver or black finish.\u003c\/p\u003e","brand":"Lopolight","offers":[{"title":"Silver \/ Single Stack","offer_id":52271522939061,"sku":"QBP611557-V1","price":677.19,"currency_code":"USD","in_stock":true},{"title":"Black \/ Single Stack","offer_id":52271522971829,"sku":"QBP611557-V2","price":677.19,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Double Stack","offer_id":52271523004597,"sku":"QBP611557-V3","price":1193.41,"currency_code":"USD","in_stock":false},{"title":"Black \/ Double Stack","offer_id":52271523037365,"sku":"QBP611557-V4","price":1193.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1309226_qbp611557.png?v=1771555182","url":"https:\/\/www.qualityboatparts.com\/products\/qbp611557","provider":"Quality Boat Parts","version":"1.0","type":"link"}