{"product_id":"qbp610331","title":"Lopolight 301-102 Port Sidelight, Vertical Mount, 3 NM, 10-32VDC","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lopolight 301-102 Series is a 3 nm red port sidelight for vertical mounting on vessels over 50 m (164 ft). It runs on 10-32 VDC for 12 V and 24 V systems, and the housing is IP68-rated for rain, spray, and washdowns.\u003c\/p\u003e\u003cp\u003eAcross the range, the light output covers the 112.5° port sidelight sector and comes from a single LED with a fully potted interior to handle vibration and water exposure. Power draw is 2 W (about 150 mA at 12 V and 100 mA at 24 V), which keeps electrical load low for continuous night running.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e3 nm visibility with intensity greater than 15 cd, specified for vessels over 50 m (164 ft).\u003c\/li\u003e\n\u003cli\u003e10-32 VDC input; 2 W draw with typical current of 150 mA at 12 V and 100 mA at 24 V.\u003c\/li\u003e\n\u003cli\u003eIP68 sealing and a fully potted interior for water resistance and vibration tolerance.\u003c\/li\u003e\n\u003cli\u003eVertical-mount format with a pre-cabled 2.5 m shielded marine-grade cable; minimum feed wire gauge 0.5 mm2 (AWG22).\u003c\/li\u003e\n\u003cli\u003eSimple DC wiring with red lead for power and black lead for ground.\u003c\/li\u003e\n\u003cli\u003eAluminum housing with finish options plus a PMMA lens and A4 stainless mounting screws.\u003c\/li\u003e\n\u003cli\u003eOperating temperature range from -25°C to 55°C.\u003c\/li\u003e\n\u003cli\u003eApproved to COLREG72, EN14744, IEC 60945, IACS E10, and USCG (UL1104).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis series is available with different finishes and housing formats while keeping the same core optical and electrical specification: 3 nm red port sidelight output, 10-32 VDC operation, IP68 sealing, 2 W draw, and a 2.5 m pre-cabled connection.\u003c\/p\u003e\u003cp\u003eFinish options include silver anodized, black anodized, and white ceramic coated. Style options include a single-stack housing (92.5 x 28 x 49.7 mm) and a double-stack housing (100 x 100 x 49.7 mm) used where a double port sidelight assembly is specified.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNavigation light, pre-cabled with 2.5 m shielded marine-grade cable\u003c\/li\u003e\n\u003cli\u003e2 mounting screws (M6 x 8 mm)\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the light on the port side in a true vertical orientation so the 112.5° sector lines up correctly with the vessel’s centerline. Use appropriate bedding and sealing around fasteners and cable routing to keep moisture out of the mounting surface, especially on aluminum or composite superstructure panels.\u003c\/p\u003e\u003cp\u003ePlan the cable run before fastening the unit down. Keep the cable protected from chafe, heat, and moving gear, and leave a service loop so the light can be removed later without pulling new wire.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe light accepts 10-32 VDC and can be tied into a standard navigation light circuit on 12 V or 24 V boats. Connect the red lead to the switched positive feed and the black lead to DC negative, using proper circuit protection and marine-grade terminations suited to the environment.\u003c\/p\u003e\u003cp\u003eWith a typical draw of 150 mA at 12 V (100 mA at 24 V), it fits well in multi-light nav circuits on large vessels where load budgeting and cable sizing matter.\u003c\/p\u003e\u003ch6\u003eMaterials and corrosion resistance\u003c\/h6\u003e\u003cp\u003eThe housing is aluminum with anodized or ceramic-coated finish options, paired with a PMMA lens and A4 stainless mounting screws. The electronics are potted, which helps keep water out and supports long-term use on boats that see constant vibration and regular deck washdowns.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a match for superyachts and commercial vessels over 50 m that require 3 nm port sidelights, including refits where you want low current draw and fully sealed construction. The double-stack versions are commonly specified in installations calling for a double port sidelight body while keeping the same voltage range and light output category.\u003c\/p\u003e","brand":"Lopolight","offers":[{"title":"Silver \/ Single Stack","offer_id":52271522185397,"sku":"QBP610331-V1","price":1151.13,"currency_code":"USD","in_stock":true},{"title":"Black \/ Single Stack","offer_id":52271522218165,"sku":"QBP610331-V2","price":1151.13,"currency_code":"USD","in_stock":true},{"title":"White \/ Single Stack","offer_id":52271522250933,"sku":"QBP610331-V3","price":1394.64,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Double Stack","offer_id":52271522283701,"sku":"QBP610331-V4","price":2197.65,"currency_code":"USD","in_stock":true},{"title":"Black \/ Double Stack","offer_id":52271522316469,"sku":"QBP610331-V5","price":2197.65,"currency_code":"USD","in_stock":true},{"title":"White \/ Double Stack","offer_id":52271522349237,"sku":"QBP610331-V6","price":2662.54,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1309212_qbp610331.png?v=1771555180","url":"https:\/\/www.qualityboatparts.com\/products\/qbp610331","provider":"Quality Boat Parts","version":"1.0","type":"link"}