{"product_id":"qbp605892","title":"Raymarine DST810 Gen2 Smart Multisensor Thru-Hull Transducer, Plastic, 0° Tilt, SeaTalkng, Bluetooth","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine E70667 is a DST810 Gen2 Airmar Smart transducer for plastic thru-hull installation, combining depth, speed-through-water, water temperature, heel, and trim data in one compact sensor. It reads depth to 330 ft, uses a 235 kHz frequency, and connects through a single SeaTalkng and NMEA 2000 network cable.\u003c\/p\u003e\u003cp\u003eThis transducer is built for boats that need instrument data without separate depth, speed, and temperature sensors. The Gen2 paddlewheel supports speed readings from 0.3 to 45 knots, while the built-in attitude sensor adds heel and trim information that is useful for sailboats, performance cruising, and setup checks on powerboats.\u003c\/p\u003e\u003cp\u003eBluetooth pairing with the Airmar CAST app lets speed-through-water calibration be handled from a phone or tablet. The retractable thru-hull format also makes routine cleaning and service more practical when the paddlewheel needs attention.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMeasures depth, speed-through-water, water temperature, heel, and trim from one thru-hull sensor.\u003c\/li\u003e\n\u003cli\u003ePlastic housing for fiberglass and aluminum hull installations where a plastic thru-hull fitting is suitable.\u003c\/li\u003e\n\u003cli\u003eDepth capability of 330 ft and 235 kHz operation for shallow-water and coastal instrument use.\u003c\/li\u003e\n\u003cli\u003eGen2 paddlewheel reads speed from 0.3 to 45 knots, helping with low-speed calibration and underway performance checks.\u003c\/li\u003e\n\u003cli\u003eSeaTalkng and NMEA 2000 networking sends data to compatible Raymarine instruments, chartplotters, and multifunction displays.\u003c\/li\u003e\n\u003cli\u003eBluetooth calibration through the Airmar CAST app reduces the need to adjust speed-through-water settings at the display.\u003c\/li\u003e\n\u003cli\u003e20 ft cable length gives installers room to route the connection from the thru-hull location to the vessel network backbone.\u003c\/li\u003e\n\u003cli\u003eSupports deadrise angles up to 22 degrees for common sailboat and powerboat hull shapes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe E70667 is a plastic thru-hull transducer, so placement should be planned where the sensor has clean water flow across the paddlewheel and enough inside access for service. Avoid areas behind strakes, through-hulls, prop wash, or heavy turbulence, since disturbed water can affect speed-through-water readings.\u003c\/p\u003e\u003cp\u003eThe retractable insert helps with inspection and cleaning, which matters in saltwater and fouling-prone areas. As with any below-waterline fitting, installation should follow proper marine bedding, tightening, and leak-check practices for the hull material and fitting location.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis model is intended for Raymarine instrument and multifunction display systems using SeaTalkng or NMEA 2000 networking. It is a good match for boats where depth, speed, temperature, heel, and trim data need to be shared across the onboard electronics network rather than read by a single standalone display.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm that the hull material, deadrise, available cable route, and network connection match the vessel. The plastic thru-hull body is listed for fiberglass and aluminum hulls, and the installation location must allow safe access from inside the boat.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eFor cruising boats, the transducer keeps core instrument data available at the helm for depth awareness, speed checks, and water temperature readings. For sailors, heel and trim data add useful context when comparing boat speed, sail trim, and loading from one tack to the other.\u003c\/p\u003e\u003cp\u003eThe single-sensor layout also helps keep the hull cleaner than separate sensors for each function. It suits owners upgrading an older instrument transducer or building a Raymarine network where accurate speed-through-water and depth data are part of everyday navigation.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":52023858036917,"sku":"QBP605892","price":409.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330896_qbp605892.jpg?v=1780192053","url":"https:\/\/www.qualityboatparts.com\/products\/qbp605892","provider":"Quality Boat Parts","version":"1.0","type":"link"}