{"product_id":"qbp594659","title":"Garmin Bail Mount with Knobs, For GPSMAP 8x10 and 9x10","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12798-00 is a bail mount with knobs for GPSMAP 8x10 and 9x10 chartplotters. It gives you a surface-mount bracket option when you are not flush-mounting the display, and the tilt adjustment helps you dial in the viewing angle at the helm.\u003c\/p\u003e\u003cp\u003eThis mount style is commonly used on dash tops and console shelves where you want the screen up off the surface with room to route power and network cables behind the unit. The side knobs let you loosen, tilt, and re-tighten by hand, which is handy after trailering or when different operators prefer a different angle.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBail-style surface mount with hand knobs for tilt adjustment\u003c\/li\u003e\n\u003cli\u003eMade for Garmin GPSMAP 8x10 and 9x10 series displays\u003c\/li\u003e\n\u003cli\u003eFits common 8x10 and 9x10 models including GPSMAP 8410, 8410xsv, 8610, 8610xsv, 9010, 9010XSV, 9210, and 9210XSV\u003c\/li\u003e\n\u003cli\u003eLets you set the screen angle to manage glare and sightlines from seated or standing positions\u003c\/li\u003e\n\u003cli\u003eUseful as a replacement bracket when the original bail mount or knobs are worn, missing, or damaged\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a bracket mount for GPSMAP units in the 8x10 and 9x10 families. Match your display model to the compatible list above before ordering, since mounts are not interchangeable across all Garmin screen sizes.\u003c\/p\u003e\u003cp\u003eBecause it is a bail mount, it is intended for surface installations where the display sits on the bracket rather than being recessed into the panel.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting position so the display can tilt through its range without hitting the dash, windshield frame, or throttle binnacle. Leave space for connector bend radius and provide strain relief so cables are not carrying the weight of movement or vibration.\u003c\/p\u003e\u003cp\u003eUse fasteners that match your mounting surface and marine environment, and reinforce thin fiberglass or plastic with a backing plate where needed. After the first few runs, re-check fastener tightness and knob tension as the installation settles.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis mount is a good match for boats where the viewing angle changes through the day, such as open center consoles, pilothouses, and trailer boats that see regular vibration. It also works well when you want the display raised for quick glances while staying clear of other helm gear.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt and spray off the bracket and knobs with fresh water during routine washdowns. If the mount starts to slip, clean the contact areas and confirm the knobs can be tightened fully without interference.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269243891893,"sku":"QBP594659","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299258_qbp594659.jpg?v=1771542745","url":"https:\/\/www.qualityboatparts.com\/products\/qbp594659","provider":"Quality Boat Parts","version":"1.0","type":"link"}