{"product_id":"qbp587987","title":"Victron Energy MPPT Control Display, VE.Direct Port, Flush Mount","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy SCC900500000 is an MPPT Control display for reading and configuring Victron BlueSolar and SmartSolar MPPT solar charge controllers through VE.Direct. It gives a fixed panel readout for solar watts, PV voltage and current, battery voltage, charge current, charge stage, daily yield, 30-day history, and cumulative history, so the boat’s solar charging status can be checked without opening an app or connecting a laptop.\u003c\/p\u003e\u003cp\u003eThe display is made for flush mounting and uses the familiar BMV-700 style housing, with a 69 x 69 mm front bezel, 52 mm body diameter, 31 mm body depth, and 50 g weight. It is powered through the VE.Direct connection at 5Vdc in normal installations, or from the supplied fused power cable on certain early controller models, with a battery-powered range of 6.5 to 95Vdc.\u003c\/p\u003e\u003cp\u003eFor marine electrical panels, nav stations, and protected helm locations, this unit is useful when solar charging needs to be visible at a glance during coastal cruising, fishing days, or time at anchor. It is a display and control interface, not a solar charger by itself, so it should be paired with a compatible Victron MPPT controller.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eShows live solar charger data, including PV power, PV voltage, PV current, battery voltage, battery current, and charge stage.\u003c\/li\u003e\n\u003cli\u003eDisplays 30-day history and cumulative solar charger values for tracking charging performance over time.\u003c\/li\u003e\n\u003cli\u003eAllows setup of compatible Victron MPPT solar charger settings directly from the panel display.\u003c\/li\u003e\n\u003cli\u003eConnects to the solar charger by VE.Direct for a clean link between the display and controller.\u003c\/li\u003e\n\u003cli\u003eFlush-mount format suits electrical panels, cabin control panels, and protected helm dashboards.\u003c\/li\u003e\n\u003cli\u003eLow power draw of less than 0.05W with the backlight turned off helps keep monitoring loads small.\u003c\/li\u003e\n\u003cli\u003eOperating temperature range of -20 to +50°C supports normal cabin and panel locations on board.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe MPPT Control display works with the Victron Energy BlueSolar MPPT and SmartSolar MPPT solar charger range, except for the discontinued BlueSolar MPPT 70\/15. The solar charger must have the VE.Direct connection used by this display.\u003c\/p\u003e\u003cp\u003eIt is a sensible fit for boats where the solar controller is hidden in a locker, electrical compartment, or technical space, but the charging information needs to be visible near the main DC panel or nav area. It keeps the solar readout in a fixed location, which is helpful when more than one person may need to check battery charging status during a trip.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe display connects to the solar charger with a VE.Direct cable. That cable is not included and should be selected separately in the correct length and connector style for the installation. The VE.Direct cable should not be extended, and the total cable length must not exceed 10 m.\u003c\/p\u003e\u003cp\u003eIn most current installations, the display is powered through the VE.Direct cable. The supplied fused power cable is only needed with certain very early solar charger models that shut down when solar input is not available, allowing the display to stay powered from the battery when the sun is down or solar input is low.\u003c\/p\u003e\u003cp\u003eThe front bezel measures 69 x 69 mm, while the body diameter is 52 mm and the body depth is 31 mm. These dimensions are important when checking clearance behind a switch panel, console insert, or nav station face before cutting the mounting hole.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMPPT Control display\u003c\/li\u003e\n\u003cli\u003eFused power cable, 1.5 m\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52023526424757,"sku":"QBP587987","price":51.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1332295_qbp587987.jpg?v=1780191855","url":"https:\/\/www.qualityboatparts.com\/products\/qbp587987","provider":"Quality Boat Parts","version":"1.0","type":"link"}