{"product_id":"qbp557818","title":"Hella Marine Sea Hawk-XLR LED Floodlight, 9-33V, IP67, 1500lm, 5000K","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Hella Marine Sea Hawk-XLR is a bracket-mount LED floodlight for deck and spreader duty that runs on 9-33V DC, so it suits both 12V and 24V systems. Output is 1500 lumens with a 5000K white color temperature, and the housing is rated IP67 for a fully sealed install in wet, exposed locations.\u003c\/p\u003e\u003cp\u003eOn high mode it draws 18W (less than 1.5A at 12V and less than 0.75A at 24V), with a low mode at 2W for times when you want light on deck without full output. The light is pre-wired with 2.5 m of tinned marine cable, and the assembly weight is 450 g including the cable.\u003c\/p\u003e\u003cp\u003eThis is a practical fit for cockpits, foredecks, working areas, and spreader mounts on powerboats and sailboats where spray, washdowns, and vibration are part of normal use. The main choice comes down to beam pattern and housing color, so you can match the way you work on board and how you want the light to look on the hardtop, mast, or arch.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMultivolt 9-33V DC operation for common 12V and 24V electrical systems\u003c\/li\u003e\n\u003cli\u003e1500-lumen output with 5000K white light for clear deck and work-area visibility\u003c\/li\u003e\n\u003cli\u003eTwo output levels: 18W high mode and 2W low mode\u003c\/li\u003e\n\u003cli\u003eCurrent draw on high mode is less than 1.5A at 12V and less than 0.75A at 24V\u003c\/li\u003e\n\u003cli\u003eIP67 rating for a completely sealed light suitable for spray and washdowns\u003c\/li\u003e\n\u003cli\u003eCorrosion-proof thermal polymer housing to avoid aluminium housing corrosion risks\u003c\/li\u003e\n\u003cli\u003eGrilamid plastic lens that resists impact and UV exposure\u003c\/li\u003e\n\u003cli\u003ePolished 316 stainless steel mounting bracket for saltwater hardware longevity\u003c\/li\u003e\n\u003cli\u003ePre-wired with 2.5 m of tinned marine cable for cleaner routing and connections\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe Sea Hawk-XLR range is offered in multiple configurations so you can match the light to your mounting position and the area you want to illuminate.\u003c\/p\u003e\u003cp\u003eAcross the options below, the variables are housing color (black or white) and beam pattern (spot or spread).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e980740211: White housing with Spot beam pattern. Spot keeps the beam tighter when you need reach from a mast, hardtop, or tower.\u003c\/li\u003e\n\u003cli\u003e980740201: Black housing with Spot beam pattern. This option suits forward-facing lighting and other longer-throw tasks where you want light concentrated in a smaller area.\u003c\/li\u003e\n\u003cli\u003e980740001: Black housing with Spread beam pattern. Spread throws light wider at close range for working areas like cockpits, foredecks, and boarding zones.\u003c\/li\u003e\n\u003cli\u003e980740011: White housing with Spread beam pattern. This is a clean look on white gelcoat while still covering a broad area for deck work and dockside handling.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eMount the bracket to a solid surface on the hardtop, arch, mast, or spreader base, and seal fasteners where they pass through exposed panels. Route the tinned cable away from heat sources and moving gear, then terminate with marine-grade, sealed connections on a fused, switched circuit sized for the load and wire run.\u003c\/p\u003e\u003cp\u003eBecause the light accepts 9-33V DC, it can be used on boats that see voltage swings from charging systems or low battery conditions without needing a separate regulator.\u003c\/p\u003e\u003ch6\u003eMaterials and corrosion resistance\u003c\/h6\u003e\u003cp\u003eThe housing is a corrosion-proof thermal polymer that helps manage heat without relying on an aluminium body, and the bracket is polished 316 stainless steel. The Grilamid lens is built to handle UV exposure and knocks that can happen around rigging, gear lockers, and busy deck spaces.\u003c\/p\u003e","brand":"Hella Marine","offers":[{"title":"White Housing \/ Spot","offer_id":52271464382645,"sku":"QBP557818-V1","price":385.78,"currency_code":"USD","in_stock":true},{"title":"Black Housing \/ Spot","offer_id":52271464415413,"sku":"QBP557818-V2","price":385.78,"currency_code":"USD","in_stock":true},{"title":"Black Housing \/ Spread","offer_id":52271464448181,"sku":"QBP557818-V3","price":385.78,"currency_code":"USD","in_stock":true},{"title":"White Housing \/ Spread","offer_id":52271464480949,"sku":"QBP557818-V4","price":374.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1308534_qbp557818.jpg?v=1771555009","url":"https:\/\/www.qualityboatparts.com\/products\/qbp557818","provider":"Quality Boat Parts","version":"1.0","type":"link"}