{"product_id":"qbp550023","title":"Simrad S5100 CHIRP Sonar Module, For NSS evo3\/evo2 and NSO evo2 and S2000-Series, 3-Channel, 25-250 kHz, Up to 3 kW, 3 x 9-Pin Transducer Connectors","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Simrad 000-13260-001 is a 3-channel CHIRP sonar module that adds a dedicated sounder to compatible Simrad displays over Ethernet. It runs on 12 or 24 V DC (10.4 to 31.2 V) with a recommended 5 A fuse, and sonar output can reach up to 3 kW RMS depending on the transducer.\u003c\/p\u003e\u003cp\u003eWith three independent sonar channels, it lets you view up to three depth ranges at the same time and mix CHIRP bands such as Ultra-Low, Low, Medium, and High. Frequency tuning spans 28 to 250 kHz, and maximum depth can reach 3,000 m (10,000 ft) with a suitable transducer.\u003c\/p\u003e\u003cp\u003eThe unit bulkhead mounts and measures 340 x 100 x 250 mm excluding connectors (378 mm including connectors), with a weight of 4.7 kg (10.4 lb). The housing is rated IPX5 for spray and washdowns, so it belongs in a protected mounting spot rather than an exposed deck location.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eThree fully independent CHIRP sonar channels for simultaneous split-screen depth-range viewing on supported displays\u003c\/li\u003e\n\u003cli\u003eSonar output up to 3 kW RMS, dependent on the connected transducer\u003c\/li\u003e\n\u003cli\u003eCHIRP frequency tuning from 28 to 250 kHz, with selectable bands including Ultra-Low, Low, Medium, and High\u003c\/li\u003e\n\u003cli\u003eThree 9-pin transducer connectors for up to three single-channel transducers, or a dual-channel plus a single-channel setup\u003c\/li\u003e\n\u003cli\u003e12 or 24 V DC input (10.4 to 31.2 V) with a recommended 5 A fuse; power consumption is 85 W max and 23 W typical\u003c\/li\u003e\n\u003cli\u003eEthernet connection (1 x 100 Mbps) for control and sonar data sharing across a networked Simrad system\u003c\/li\u003e\n\u003cli\u003eBulkhead-mount form factor with IPX5 water resistance; 340 x 100 x 250 mm excluding connectors (378 mm including connectors), 4.7 kg (10.4 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and system integration\u003c\/h6\u003e\u003cp\u003eThe module connects to the boat's Ethernet network and is controlled from compatible Simrad displays and fishfinders, including NSS evo3, NSS evo2, NSO evo2, and S2000-series units. When multiple displays are on the same Ethernet network, the sonar source can be shared so you can call up the same channels from different helms or stations.\u003c\/p\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eMount the module on a bulkhead in a dry, protected area with airflow around the case, and leave room for the cabling. With connectors installed, plan on about 378 mm of depth behind the mounting surface.\u003c\/p\u003e\u003cp\u003ePower is through a 4-pin cable to a 12 V or 24 V DC supply. Use a 5 A fuse and marine-grade terminations, and keep at least 1.8 m (6 ft) separation from a magnetic compass.\u003c\/p\u003e\u003cp\u003eThe unit provides three 9-pin transducer ports. Disconnect power before plugging or unplugging transducer cables.\u003c\/p\u003e\u003ch6\u003eTransducers and channel planning\u003c\/h6\u003e\u003cp\u003eUp to three 9-pin transducers can be connected directly, with each channel running independently. A dual-element transducer that uses two channels can be paired with a third single-channel transducer on the remaining channel. Transducers with a 7-pin connector can be used with a 7-pin to 9-pin adapter cable.\u003c\/p\u003e\u003cp\u003eThis is a practical fit for boats that want separate views for shallow structure, mid-water bait, and deep bottom during offshore runs, or for anglers who want to cover different beam patterns without swapping transducers between trips.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eEthernet cable (15 ft)\u003c\/li\u003e\n\u003cli\u003ePower cable (4-pin)\u003c\/li\u003e\n\u003cli\u003eThree 7-pin to 9-pin transducer adapter cables\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":52269057310901,"sku":"QBP550023","price":2298.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298557_qbp550023.jpg?v=1771541660","url":"https:\/\/www.qualityboatparts.com\/products\/qbp550023","provider":"Quality Boat Parts","version":"1.0","type":"link"}