{"product_id":"qbp549733","title":"Garmin OnDeck In\/Out Data Cable, For OnDeck Hub, Sensor\/Relay Output, 19-Pin","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-13009-04 is a replacement OnDeck In\/Out Data Cable with a 19-pin connector for sensor and relay output connections on a compatible OnDeck Hub.\u003c\/p\u003e\u003cp\u003eIt is used when the original I\/O lead is damaged, missing, or you are reworking a vessel monitoring install and want a fresh cable run. This is the wired link between the hub and the external inputs and outputs used for onboard monitoring and switching.\u003c\/p\u003e\u003cp\u003eBecause this is the 19-pin version, confirm your hub uses the matching in\/out port before ordering, and plan the routing so the connector lives in a protected location away from spray and washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eReplacement 19-pin In\/Out data cable for a compatible Garmin OnDeck Hub\u003c\/li\u003e\n\u003cli\u003eSupports sensor connections and relay output wiring used by the OnDeck system\u003c\/li\u003e\n\u003cli\u003e19-pin connector interface for the hub’s in\/out port\u003c\/li\u003e\n\u003cli\u003eBlack cable jacket for a clean, low-visibility install in lockers and electrical spaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eMade for an OnDeck Hub that uses the 19-pin in\/out connector for sensor and relay output wiring. If your hub uses a different connector style, this cable will not connect.\u003c\/p\u003e\u003cp\u003eIf you are replacing an existing cable, match the connector style and pin count at the hub end first, then verify you have a routing path from the hub mounting location to where your I\/O wiring is managed.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eShut down power to the OnDeck system before swapping cables. Route the new cable with a service loop at the hub, then secure it every so often so it cannot chafe on fiberglass edges, aluminum brackets, or moving gear.\u003c\/p\u003e\u003cp\u003eIn damp lockers and engine-room-adjacent spaces, add strain relief and keep the connector and any junction points above the sole where possible. A simple drip loop and a protected mounting location go a long way toward avoiding corrosion and intermittent connections later.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis cable is a good match for boaters running an OnDeck Hub who need a dependable sensor and relay output connection point for ongoing vessel monitoring, refits, or troubleshooting a damaged harness.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269136904373,"sku":"QBP549733","price":59.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299373_qbp549733.jpg?v=1771542125","url":"https:\/\/www.qualityboatparts.com\/products\/qbp549733","provider":"Quality Boat Parts","version":"1.0","type":"link"}