{"product_id":"qbp541717","title":"Lopolight Series 201-011 LED Masthead Light, 3NM, Vertical Mount, 10-32VDC, IP68, 15m Cable","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lopolight 201-011-15M is a white masthead navigation light with a 225° sector and 3 NM visibility, supplied for vertical mounting with a 15 m cable. It runs on 10-32V DC and draws 3 W (232 mA at 12VDC, 127 mA at 24VDC), so it works on standard 12V and 24V onboard systems.\u003c\/p\u003e\u003cp\u003eThe housing measures 74.55 x 28 x 73.16 mm (2.9 x 1.1 x 2.88 in) and is sealed to an IP68 rating for exposed mounting locations. It is rated for vessels 12-20 m and approved to COLREG72, EN14744, IEC 60945, IACS E10, and USCG.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e3 NM white masthead light with a 225° sector and \u0026gt;15 cd intensity\u003c\/li\u003e\n\u003cli\u003e10-32V DC input for 12V or 24V systems\u003c\/li\u003e\n\u003cli\u003e3 W draw (232 mA @ 12VDC, 127 mA @ 24VDC)\u003c\/li\u003e\n\u003cli\u003eIP68 rating for spray, rain, and washdowns at the masthead\u003c\/li\u003e\n\u003cli\u003eSilver anodized aluminum (25 µ) body with a PMMA lens and A4 stainless mounting screws\u003c\/li\u003e\n\u003cli\u003eVertical mount format with a 15 m cable for long runs down a mast or through a hardtop\u003c\/li\u003e\n\u003cli\u003eOperating temperature range of -25°C to 55°C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNavigation light with 15 m cable\u003c\/li\u003e\n\u003cli\u003e2 mounting screws (M6 x 8 mm)\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a masthead (steaming) light that needs a clear forward-facing 225° arc. Install it on the vessel centerline and keep antennas, wind instruments, and rigging out of the light sector so the beam is not shadowed.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount vertically using the supplied M6 fasteners on a flat surface. Route the cable with strain relief at the light and a drip loop before the cable enters the mast or cabin, then protect the run at mast exits and deck glands to avoid chafe from vibration.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eWire it into a 10-32V DC navigation-light circuit controlled by your switch panel or lighting controller. The recommended minimum feed wire size is 0.5 mm² (AWG 22), and the circuit should be protected with an appropriately sized fuse or breaker for the load and the cable run.\u003c\/p\u003e\u003ch6\u003eMaterials and sealing\u003c\/h6\u003e\u003cp\u003eThe body uses silver anodized aluminum with a PMMA lens and A4 stainless hardware to suit saltwater exposure. The IP68 seal and operating range from -25°C to 55°C help it stay stable through cold starts, hot sun, and regular washdowns.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis light fits powerboats and motorsailers in the 12-20 m range that need a certified 3 NM masthead light, especially when the wiring run from the masthead to the distribution point is long. It also suits refits where the existing cable chase is tight and a pre-attached 15 m lead simplifies routing.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt off the lens and housing during routine washdowns and keep the lens clear of dried salt film. At least once a season, inspect the cable where it passes through glands and mast exits, and re-seal any penetrations if you see moisture tracking.\u003c\/p\u003e","brand":"Lopolight","offers":[{"title":"Default Title","offer_id":52268924207285,"sku":"QBP541717","price":975.48,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1301275_qbp541717.png?v=1771540859","url":"https:\/\/www.qualityboatparts.com\/products\/qbp541717","provider":"Quality Boat Parts","version":"1.0","type":"link"}