{"product_id":"qbp539700","title":"Garmin Force Trolling Motor Wireless Foot Pedal, AA Batteries, Hardwire Power","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12834-00 is a wireless foot pedal that controls a Garmin Force trolling motor when you want steering and speed underfoot instead of reaching for a handheld remote. It links to the motor over 2.4 GHz and carries an IPX7 water rating for spray, washdowns, and the occasional accidental dunk.\u003c\/p\u003e\u003cp\u003eYou can run it fully wireless on two AA batteries (alkaline, NiMH, or lithium), or hardwire it to the boat using the included 2 m (6.6 ft) power cable with an in-line 2 A mini-blade fuse. The pedal accepts 10 to 45 Vdc and is rated for 12\/24\/36 V systems, so it fits cleanly into most bow electronics layouts.\u003c\/p\u003e\u003cp\u003ePhysically, it measures 303 x 221 x 110 mm (11 15\/16 x 8 11\/16 x 4 5\/16 in) and weighs 1.8 kg (4 lb). That size works well on the front deck of a bass boat, or dropped into a foot pedal tray when you want a cleaner cockpit.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eWireless communication to the trolling motor, so there is no control cable to the motor\u003c\/li\u003e\n\u003cli\u003ePower options: two AA batteries (not included) or hardwired power using the included cable\u003c\/li\u003e\n\u003cli\u003eWide input range (10 to 45 Vdc) with rated 12\/24\/36 V system support\u003c\/li\u003e\n\u003cli\u003eIncluded 2 m (6.6 ft) power cable with an in-line 2 A mini-blade fuse\u003c\/li\u003e\n\u003cli\u003eIPX7 water rating (IEC 60529)\u003c\/li\u003e\n\u003cli\u003eAdjustable tension screw to tune how the pedal feels underfoot\u003c\/li\u003e\n\u003cli\u003eCompass-safe distance: 60 cm (2 ft)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis pedal is used as a foot control for Garmin Force trolling motors. Because it communicates wirelessly, placement is mostly about comfort and deck layout rather than cable routing between the pedal and the motor.\u003c\/p\u003e\u003cp\u003eIf you are using a recessed foot pedal well or an aftermarket tray, you can mount the pedal in the tray and shim it to the height you want. The deck footprint is substantial, so it is worth confirming you have clear space for the full pedal travel before drilling.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eYou can use the pedal loose on deck, but securing it is strongly recommended, especially when you plan to run on batteries. Mounting hardware is not included; a common approach is four 5 mm (#10) stainless self-tapping screws sized for your deck material, with 3 mm (1\/8 in) pilot holes and a dab of marine sealant in each hole to keep water out of the core.\u003c\/p\u003e\u003cp\u003eFor hardwired power, route the included cable to a battery or breaker, connect red to positive and black to negative, and lock the connector into the port on the bottom of the pedal. If you need more length, extend with 18 AWG (0.82 mm2) wire and keep the fuse between the power source and the extension.\u003c\/p\u003e\u003ch6\u003eElectrical and power notes\u003c\/h6\u003e\u003cp\u003eBattery power uses two AA cells and is rated for at least 1 year of battery life under normal use. If you wire the pedal to boat power, do not leave AA batteries installed, since long-term storage can lead to corrosion in the battery compartment.\u003c\/p\u003e\u003cp\u003eFor boats with magnetic compasses or compass sensors near the bow, keep the pedal at least 60 cm (2 ft) away to avoid interference.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis setup makes sense for anglers who want hands on the rod while making small steering and speed changes from the bow. It is also a good match when you are working around the front deck and want motor control without carrying a remote from spot to spot.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFoot pedal\u003c\/li\u003e\n\u003cli\u003ePower cable (2 m \/ 6.6 ft) with in-line 2 A mini-blade fuse\u003c\/li\u003e\n\u003cli\u003eMounting template\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269177077941,"sku":"QBP539700","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299325_qbp539700.jpg?v=1771542343","url":"https:\/\/www.qualityboatparts.com\/products\/qbp539700","provider":"Quality Boat Parts","version":"1.0","type":"link"}