{"product_id":"qbp536244","title":"Simrad Verado Autopilot Pump Fitting Kit, For MKII Pumps 1-5, SteadySteer Flow Switch","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Simrad 000-15950-001 is a pre-made hydraulic hose and fitting kit that adds the SteadySteer flow switch to a Verado steering system when you are installing a Simrad MKII autopilot pump. It is listed for MKII Pumps 1 through 5 and ORB steering layouts, including SeaStar-style systems. The hose set uses 1\/4 in. lines with up to 2800 PSI rating (2250 PSI on the return hose) and includes multiple pre-cut lengths so the flow switch can be plumbed in without field-terminated hoses.\u003c\/p\u003e\u003cp\u003eOn the water, SteadySteer lets you turn the helm for a manual course change without digging through menus. Once a new heading is established, the autopilot can resume on the straight leg without key-presses or alarms, which is useful in tight channels, while trolling, or any time you want quick helm control.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHydraulic fitting and hose kit for Verado steering systems using Simrad MKII Pumps 1 to 5\u003c\/li\u003e\n\u003cli\u003eIncludes the SteadySteer flow switch plus the hoses and tees needed to plumb it into the steering circuit\u003c\/li\u003e\n\u003cli\u003eCompatible with O-Ring Boss (ORB) steering systems, including SeaStar-style installations\u003c\/li\u003e\n\u003cli\u003ePre-cut hose lengths and pre-selected fittings help avoid routing mistakes and mismatched hydraulic ends\u003c\/li\u003e\n\u003cli\u003eO-ring sealed connections using the listed ORFS fittings, with straight adapters for 1\/4 NPT to 9\/16-24 UNF\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis kit is meant for boats with a Verado steering system where the autopilot pump is a Simrad MKII model. Before ordering, confirm your steering layout uses ORB-style components and that the fitting types and sizes match your existing plumbing, since the supplied hoses and tees use specific 9\/16 and 11\/16 ORFS sizes alongside UNF and NPT adaptors.\u003c\/p\u003e\u003cp\u003eBecause the hoses are fixed-length, it also helps to check the intended mounting location for the pump and where the flow switch will sit so you are not forced into tight bends or chafe points in the rigging tube.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eHydraulic connections are sensitive to dirt and nicks, especially with O-ring face seal fittings. Keep the sealing faces clean, inspect O-rings before assembly, and route hoses so they are supported and protected from vibration and abrasion. After plumbing is complete, bleed the steering system thoroughly and re-check for seepage once the boat has been run and the system has seen pressure.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a good fit for Verado-powered fishing boats and fast center consoles that spend time running inlets, following contour lines, or working trolling patterns, where the helm gets used often even while the autopilot is engaged.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e3 hoses, black, 1\/4 in. diameter, 2800 PSI max, 915 mm (36 in.), 9\/16-18 ORFS (O-ring face seal) to 9\/16 UNF\u003c\/li\u003e\n\u003cli\u003e2 hoses, black, 2800 PSI max, 370 mm (14.5 in.), 9\/16-18 UNF to 9\/16-24 ORFS\u003c\/li\u003e\n\u003cli\u003e1 hose, black, 2800 PSI max, 830 mm (32.7 in.), 9\/16-18 ORFS to 9\/16-18 ORFS\u003c\/li\u003e\n\u003cli\u003e1 return hose, black, 2250 PSI max, 830 mm (32.7 in.), 11\/16-16 ORFS to 11\/16-16 ORFS\u003c\/li\u003e\n\u003cli\u003e2 T-connectors, stainless, 9\/16-18 ORFS\u003c\/li\u003e\n\u003cli\u003e1 T-connector, brass, 11\/16-16 ORFS x 9\/16-18 ORFS x 11\/16-16 ORFS\u003c\/li\u003e\n\u003cli\u003e1 SteadySteer flow switch\u003c\/li\u003e\n\u003cli\u003e2 straight adapters, 1\/4 NPT to 9\/16-24 UNF (male)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":52269007241397,"sku":"QBP536244","price":979.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298631_qbp536244.jpg?v=1771541434","url":"https:\/\/www.qualityboatparts.com\/products\/qbp536244","provider":"Quality Boat Parts","version":"1.0","type":"link"}