{"product_id":"qbp531973","title":"Raymarine RF Cable, For 45STV, 30 m, Antenna to Receiver","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine E96008 is a 30 m RF cable for Raymarine 45STV satellite TV antenna installations. It is used in the RF signal path for a 45STV system, giving installers a longer cable run when the antenna is mounted on a hardtop, radar arch, mast area, or another elevated position away from the receiver equipment.\u003c\/p\u003e\u003cp\u003eThe 30 m length is useful on larger cruising and fishing boats where the cable needs to pass through deck penetrations, cable chases, lockers, and interior panels before reaching the entertainment or electronics area. For best results, it should be routed with clean bends, kept away from sharp edges, and secured so vibration and movement do not pull on the connectors.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e30 m RF cable for Raymarine 45STV satellite TV systems.\u003c\/li\u003e\n\u003cli\u003eSuitable for longer antenna-to-equipment cable runs on boats where the antenna is mounted above the cabin or on an upper structure.\u003c\/li\u003e\n\u003cli\u003eHelps maintain a dedicated RF connection path for onboard satellite TV reception when installed as part of a compatible 45STV setup.\u003c\/li\u003e\n\u003cli\u003eUseful for refits, replacement cable runs, and new installations where the standard cable length is not enough.\u003c\/li\u003e\n\u003cli\u003eMarine installation friendly length for routing through hardtops, arches, deck glands, and interior cable paths.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is made for Raymarine 45STV satellite TV antenna systems. It is not a general GPS, NMEA 2000, SeaTalkNG, or RayNet network cable, so it should be matched to the satellite TV equipment layout before installation.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm that the vessel has a Raymarine 45STV system and that a 30 m RF cable run fits the planned route without forcing tight bends or leaving the connectors under strain. Cable routing should allow enough service loop at each end for future inspection and maintenance.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eDuring installation, route the cable away from sharp fiberglass edges, high-heat areas, and moving hardware. Any deck or bulkhead pass-through should be sealed using suitable marine cable glands or strain relief hardware to help protect the cable path from water intrusion.\u003c\/p\u003e\u003cp\u003eOn boats with crowded electronics spaces, keeping the RF cable run organized makes troubleshooting easier later. Avoid crushing the cable behind panels or bundling it tightly with heavy power cables where it may be harder to inspect or replace.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis cable is a practical match for owners and installers working on a Raymarine 45STV satellite TV setup where the antenna position is some distance from the receiver or entertainment area. It is especially relevant during hardtop installations, radar arch refits, and replacement work where the existing cable length or condition no longer suits the boat.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":52023850270901,"sku":"QBP531973","price":364.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330911_qbp531973.jpg?v=1780192040","url":"https:\/\/www.qualityboatparts.com\/products\/qbp531973","provider":"Quality Boat Parts","version":"1.0","type":"link"}