{"product_id":"qbp522474","title":"Garmin ECHOMAP Ultra 102sv Chartplotter\/Sonar Combo, Without Transducer, 10in Keyed-Assist Touchscreen, Worldwide Basemap, NMEA 2000, Panoptix LiveScope Support","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-02111-00 is the ECHOMAP Ultra 102sv chartplotter and fishfinder combo with a 10 in. keyed-assist touchscreen (1280 x 800) for navigation and sonar at the helm.\u003c\/p\u003e\u003cp\u003eIt runs on 9 to 18 Vdc and is typically 2.8 A at 12 Vdc, which fits cleanly into most 12 V boats with an 8 A fuse and a dedicated power run. The housing is rated IPX7, and the display supports polarized sunglasses for easier reading in bright conditions.\u003c\/p\u003e\u003cp\u003eThis version is supplied without a transducer, so you can match the sonar hardware to your hull style and the fishing you do. The unit has a built-in 600 W RMS sounder and supports CHIRP traditional, CHIRP ClearVü, and CHIRP SideVü, with Ultra High-Definition scanning available when paired with a compatible transducer.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10 in. keyed-assist touchscreen with 1280 x 800 resolution and polarized-sunglasses support.\u003c\/li\u003e\n\u003cli\u003e12 V friendly power requirements: 9 to 18 Vdc input, typical 2.8 A at 12 Vdc, and an 8 A fuse.\u003c\/li\u003e\n\u003cli\u003eIPX7 water rating for incidental spray and washdown exposure.\u003c\/li\u003e\n\u003cli\u003eBuilt-in 600 W RMS sonar with support for CHIRP traditional plus CHIRP ClearVü and CHIRP SideVü.\u003c\/li\u003e\n\u003cli\u003eSupport for Ultra High-Definition ClearVü (800 kHz) and Ultra High-Definition SideVü (1,200 kHz) with compatible UHD transducers.\u003c\/li\u003e\n\u003cli\u003eTwo dedicated sonar connections: one 12-pin scanning transducer port and one LVS sonar port for compatible live sonar systems.\u003c\/li\u003e\n\u003cli\u003eTwo Garmin Marine Network ports (large connector) for networking compatible displays and accessories.\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 compatibility plus NMEA 0183 input and output for integrating with common onboard electronics.\u003c\/li\u003e\n\u003cli\u003eBuilt-in Wi-Fi for ActiveCaptain pairing, software updates, and data transfer when used with a microSD card.\u003c\/li\u003e\n\u003cli\u003eTwo microSD card slots (up to 32 GB) for maps, updates, and saved data.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eOverall size is 11.6 x 7.7 x 3.9 in., and it helps to leave about 6 in. of clearance behind the unit for connectors and cable bend radius. The display can be bail mounted on a console or flush mounted into a dash panel, depending on your helm layout.\u003c\/p\u003e\u003cp\u003eBecause the power input range tops out at 18 Vdc, 24 V systems will need an appropriate DC-DC converter to stay within spec. When wiring at the helm in saltwater environments, keeping connectors supported and capping unused ports helps prevent corrosion over time.\u003c\/p\u003e\u003ch6\u003eConnectivity and system integration\u003c\/h6\u003e\u003cp\u003eUse the NMEA 2000 port to bring in sensor data such as heading, wind, depth, engine, or fuel information from compatible devices, and use NMEA 0183 input and output when you need to interface with older gear.\u003c\/p\u003e\u003cp\u003eWith two Garmin Marine Network ports, you can network compatible Garmin displays and share items like sonar data, waypoints, and routes across the network.\u003c\/p\u003e\u003ch6\u003eCharts, mapping, and sonar selection\u003c\/h6\u003e\u003cp\u003eA worldwide basemap is built in for general orientation, and the dual microSD slots let you add detailed cartography and keep an update card in place for an ActiveCaptain workflow.\u003c\/p\u003e\u003cp\u003eQuickdraw Contours can record your own maps as you run and draws 1 ft contours on screen when conditions allow. Since this package does not include a transducer, confirm the connection you plan to use: the 12-pin port is for scanning transducers and the LVS port is for compatible live sonar gear.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis unit fits well on center consoles, bass boats, and multi-station rigs where a 10 in. display works at the helm and you want one screen for navigation and fishfinding.\u003c\/p\u003e\u003cp\u003eIt also makes sense when you already have a preferred transducer or when you plan to add live sonar later and want the dedicated LVS connection ready.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269217054901,"sku":"QBP522474","price":1649.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299282_qbp522474.jpg?v=1771542525","url":"https:\/\/www.qualityboatparts.com\/products\/qbp522474","provider":"Quality Boat Parts","version":"1.0","type":"link"}