{"product_id":"qbp520461","title":"Garmin GNX Wireless Sail Pack 52, GNX Wind, GNX 20, gWind Wireless 2, DST800, NMEA 2000","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-01616-20 is a GNX Wireless Sail Pack 52 that bundles wind, depth, speed-through-water, and water temperature into a NMEA 2000 instrument system for sailboats. The two GNX displays are IPX7-rated and share the same case size of 4.3 in x 4.5 in x 1.2 in, with power drawn from the NMEA 2000 bus (9 to 16 V) and low display consumption of 0.35 W in daytime mode and 0.4 W with a mid-level backlight at night.\u003c\/p\u003e\u003cp\u003eWind data comes from the gWind Wireless 2 masthead transducer, which sends measurements over ANT and avoids running a wind cable through masts up to 50 ft. The transducer body measures 13.6 in x 24 in, is rated IPX6, and runs on a rechargeable battery supported by its solar panel.\u003c\/p\u003e\u003cp\u003eFor underwater data, the included DST800 thru-hull smart transducer feeds the NMEA 2000 network with depth, speed, and temperature, using a 100 W element that can read depths up to 330 ft. This pack is a practical fit when you want wind and water data on dedicated cockpit displays, with the option to share that information across a NMEA 2000 network.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTwo dedicated sailing displays: GNX Wind plus GNX 20, each with a glass-bonded monochrome LCD (4.0 in diagonal) in a 4.3 in x 4.5 in x 1.2 in housing\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 certified instruments with IPX7 water rating and a temperature range of -15 to 70 C\u003c\/li\u003e\n\u003cli\u003eGNX Wind screen layout supports two data fields and a digital wind rose at the same time for true and apparent wind, plus additional NMEA 2000 sailing data when available\u003c\/li\u003e\n\u003cli\u003eGNX 20 shows depth, speed-through-water, water temperature, and 50+ additional NMEA 2000 parameters, with digits scalable up to 36 mm\u003c\/li\u003e\n\u003cli\u003egWind Wireless 2 masthead sensor sends wind data over ANT, eliminating mast wiring for installations up to 50 ft, and is powered by a rechargeable battery supported by a solar panel\u003c\/li\u003e\n\u003cli\u003egWind Wireless 2 rated IPX6 with wind speed range of 0.8 to 90 knots, angle accuracy better than ±1.5 degrees, and wind speed accuracy better than ±3%\u003c\/li\u003e\n\u003cli\u003eDST800 NMEA 2000 thru-hull smart transducer combines depth, speed, and temperature in one fitting (100 W, reads to 330 ft)\u003c\/li\u003e\n\u003cli\u003eLow draw on the NMEA 2000 bus for the displays: 0.35 W daytime and 0.4 W at night with mid-level backlight\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003egWind Wireless 2 transducer with mast bracket\u003c\/li\u003e\n\u003cli\u003eGNX Wind marine instrument\u003c\/li\u003e\n\u003cli\u003eGNX 20 marine instrument\u003c\/li\u003e\n\u003cli\u003eDST800 thru-hull smart transducer\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 power cable\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 terminators\u003c\/li\u003e\n\u003cli\u003e2 NMEA 2000 drop cables (2 m)\u003c\/li\u003e\n\u003cli\u003e4 NMEA 2000 T-connectors\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eNiMH battery\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe GNX displays mount flush or on a flat surface, so they work well on a nav pod, bulkhead, or cockpit panel where you can read them while trimming sails. Each display connects to a NMEA 2000 T-connector with a drop cable, and the included terminators and power cable support building out a basic backbone. If you need more reach between stations, plan on additional backbone cable and any extra T-connectors required for your layout.\u003c\/p\u003e\u003cp\u003eThe gWind Wireless 2 installs at the masthead using the supplied bracket and transmits wind data over ANT to the GNX Wind instrument or to a compatible Garmin GPSMAP chartplotter. The DST800 requires a thru-hull install below the waterline, so it is typically handled during a haul-out with proper bedding, sealing, and routing of the sensor cable to the NMEA 2000 network connection point.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis pack is built around NMEA 2000, so it fits best on boats that already have a NMEA 2000 backbone or where you plan to install one. The instruments operate from the NMEA 2000 supply voltage range of 9 to 16 V, which aligns with standard NMEA 2000 power practices even on vessels with higher-voltage house banks.\u003c\/p\u003e\u003cp\u003eFor placement near a compass, the compass-safe distance is listed as 8.25 in for the GNX Wind and GNX 20 displays. For the underwater sensor, confirm your hull location has clean water flow for accurate speed and depth readings, and that you have access inside the boat for tightening and servicing a thru-hull fitting.\u003c\/p\u003e\u003ch6\u003eOn-board use\u003c\/h6\u003e\u003cp\u003eOn a racing boat, the GNX Wind display layout helps keep wind angle and wind rose information in view while helming and calling trim changes. On a cruising boat, the GNX 20 and DST800 combination keeps depth, speed-through-water, and temperature visible at a glance when entering unfamiliar anchorages or navigating skinny water.\u003c\/p\u003e\u003cp\u003eThis setup is a strong match for sailors who want dedicated cockpit instruments rather than relying only on a chartplotter screen, and for boats where pulling new mast wiring is a headache but you still want reliable wind data at the helm.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269163905205,"sku":"QBP520461","price":1599.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299047_qbp520461.jpg?v=1771542287","url":"https:\/\/www.qualityboatparts.com\/products\/qbp520461","provider":"Quality Boat Parts","version":"1.0","type":"link"}