{"product_id":"qbp519064","title":"Garmin VIRB X\/XE Aviation Headset Audio Cable, In-Line Pass-Through, Stereo","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12256-21 is a headset audio cable for VIRB X and VIRB XE that lets your camera record cockpit headset audio in stereo while you keep using the headset normally. It plugs in-line between the audio out jack and the headset, then feeds the same audio to the camera so intercom, radio traffic, and spoken narration end up on the video. The cable is 5 ft 9 in (1.75 m) long, which gives you enough reach to mount the VIRB where it has a clear view and still route the lead along existing wiring runs.\u003c\/p\u003e\u003cp\u003eThis cable can carry stereo music or auxiliary audio sources when they are present on the same output, and it preserves 3D Audio when used with compatible radios and audio panels. For boat use, it can be a clean way to capture headset-based comms at an enclosed helm or cockpit, as long as your system provides an audio out jack that matches your headset connection.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCompatible with VIRB X and VIRB XE action cameras\u003c\/li\u003e\n\u003cli\u003e5 ft 9 in (1.75 m) length for flexible camera placement and cleaner routing\u003c\/li\u003e\n\u003cli\u003eIn-line connection between the audio out jack and headset keeps the headset plugged in while audio is recorded\u003c\/li\u003e\n\u003cli\u003eStereo recording for headset audio, with support for 3D Audio when available from compatible radios and audio panels\u003c\/li\u003e\n\u003cli\u003ePasses through stereo music and auxiliary audio sources carried on the same output\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eRoute the cable so it will not interfere with controls, seat travel, or a moving helm. Connect it in-line between the audio out jack and your headset, then connect the camera end to your VIRB before you start recording.\u003c\/p\u003e\u003cp\u003eAfter the first connection, do a short test clip with normal headset volume so you can confirm levels before a long run. Secure the cable with gentle strain relief at each connector and keep the plugs away from standing water, spray, and high-chafe areas.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis accessory is intended for VIRB X and VIRB XE and is meant to sit between a headset and an audio out jack. Before ordering, confirm you have the correct jack type and enough clearance at the panel for an in-line connection without putting side load on the sockets.\u003c\/p\u003e\u003cp\u003eIf you are integrating it into an onboard comms setup, verify that the audio out you plan to tap is suitable for a headset-style connection and that recording that feed is permitted for your use case.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eA good match for skippers and crews who run a VIRB at the helm and want the same comms and narration they hear in their headset captured on the video. It also suits training and review where recorded radio and intercom audio matters as much as the footage.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269041385653,"sku":"QBP519064","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298970_qbp519064.jpg?v=1771541570","url":"https:\/\/www.qualityboatparts.com\/products\/qbp519064","provider":"Quality Boat Parts","version":"1.0","type":"link"}