{"product_id":"qbp517170","title":"Garmin GWS 10 Wind Vane","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11120-00 is a replacement wind vane for the Garmin GWS 10 wind sensor, restoring the moving direction element at the masthead so your system can read wind direction properly again. It ships at about 0.3 lb packaged.\u003c\/p\u003e\u003cp\u003eThis is the directional vane only, meant for a straightforward repair when the original vane has been damaged, gone missing, or no longer swings freely after seasons of sun, salt, or the occasional bird landing. Once installed, it works with your existing GWS 10 hardware and electronics.\u003c\/p\u003e\u003cp\u003eIf you already have a GWS 10 at the top of the mast and the wind direction has become erratic or stuck while wind speed still looks normal, this is the replacement part that addresses the directional side of the sensor.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eReplacement wind-direction vane that fits the Garmin GWS 10 wind sensor\u003c\/li\u003e\n\u003cli\u003eRestores wind direction readings when the original vane is cracked, missing, or binding\u003c\/li\u003e\n\u003cli\u003eMechanical replacement part only; no wiring changes to your existing instrument or network\u003c\/li\u003e\n\u003cli\u003eAppropriate for masthead exposure where constant UV, salt spray, and vibration can wear down moving parts\u003c\/li\u003e\n\u003cli\u003ePackaged shipping weight is approximately 0.3 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eCompatibility is specific to the Garmin GWS 10 wind sensor. It is not a universal vane and it is not intended for other masthead wind sensors or later Garmin wind transducers. If your boat has multiple wind systems over the years, confirm the masthead sensor model before ordering.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan for safe mast access before starting. Replace the damaged vane, then confirm it pivots freely through a full swing with no rubbing or sticking. Any obstruction at the sensor head will show up as slow response, a fixed angle, or wind direction that hangs up on one tack.\u003c\/p\u003e\u003cp\u003eAfter the swap, verify wind direction on your display while the boat is underway. If the sensor has been removed and re-mounted or rotated during service, you may need to re-check the wind angle offset setting in your instrument setup so the displayed angle matches the boat’s heading.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAt the masthead, salt crystals and airborne grime build up quickly. A periodic fresh-water rinse and a quick check that the vane still swings cleanly can prevent binding and extend the life of the moving parts. If wind direction becomes sluggish again, inspect for fouling, impact damage, or anything contacting the vane through its travel.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269067141301,"sku":"QBP517170","price":36.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298916_qbp517170.jpg?v=1771541698","url":"https:\/\/www.qualityboatparts.com\/products\/qbp517170","provider":"Quality Boat Parts","version":"1.0","type":"link"}