{"product_id":"qbp509933","title":"Lumitec Orbit Flush Mount LED Down Light, White\/Blue Dimming, Brushed Finish, 10-30V, IP67","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 112501 is an Orbit flush-mount LED downlight with a brushed finish that switches between white and blue with dimming control built into the light. It runs on 10 to 30 VDC, pulls 300 mA at 12 VDC (160 mA at 24 VDC), and is sealed to an IP67 level for spray and washdowns.\u003c\/p\u003e\u003cp\u003eWhite output is 5000K with a CRI of 70+ and up to 150 lumens, which is a good fit for general overhead lighting in cabins and covered exterior areas. The face is 1.99 in round with an overall depth of 0.72 in, so it works well where headliner space is tight.\u003c\/p\u003e\u003cp\u003eThis model is certified ignition protected, which is useful when lighting ends up in enclosed spaces where fuel vapors could be present.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTwo-color output: white and blue, with dimming controlled at the light\u003c\/li\u003e\n\u003cli\u003e10 to 30 VDC input for 12V and 24V systems\u003c\/li\u003e\n\u003cli\u003eRated 4 W with 300 mA draw at 12 VDC and 160 mA at 24 VDC\u003c\/li\u003e\n\u003cli\u003eIP67 sealed construction for wet locations and routine washdowns\u003c\/li\u003e\n\u003cli\u003e5000K white light, CRI 70+, up to 150 lumens (white)\u003c\/li\u003e\n\u003cli\u003eShallow install: 1.99 in diameter face and 0.72 in overall depth\u003c\/li\u003e\n\u003cli\u003eCertified ignition protected\u003c\/li\u003e\n\u003cli\u003eOperating temperature range of -35 C to +55 C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlush-mount down light\u003c\/li\u003e\n\u003cli\u003eMounting plate\u003c\/li\u003e\n\u003cli\u003eMounting screws\u003c\/li\u003e\n\u003cli\u003eYellow rubber installation tool\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis light uses a 1.23 in cutout and a shallow mounting depth (about 7\/16 in), which helps when you are working with thin headliners, hardtops, or overhead panels. If you are replacing older dome lights, double-check the hole size and make sure you have room for the 0.72 in body depth behind the surface.\u003c\/p\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eMounting is straightforward: fasten the mounting plate to the surface, connect the light to your DC supply, then seat the light and twist until it locks. The circuit is polarity sensitive, so confirm the positive and negative leads before powering up.\u003c\/p\u003e\u003cp\u003eControl can be handled from a simple SPST toggle or rocker switch. Color changes and dimming are done by timed power cycling at the switch, so you do not need a separate control module or additional wire runs. For circuit protection, size the fuse or breaker for the load, and allow up to 580 mA at 12 VDC or 320 mA at 24 VDC per light when planning multi-light circuits.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eWhite mode works well for day-to-day tasks at the helm, in a galley, or in passageways, while blue is a common choice for keeping night vision and keeping glare down in a cockpit. It is a good match for boats that need a small, shallow downlight that can live in wet areas and still run cleanly on either 12V or 24V.\u003c\/p\u003e\u003ch6\u003eImportant safety information\u003c\/h6\u003e\u003cp\u003eWarning: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268896420021,"sku":"QBP509933","price":135.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298157_qbp509933.jpg?v=1771540698","url":"https:\/\/www.qualityboatparts.com\/products\/qbp509933","provider":"Quality Boat Parts","version":"1.0","type":"link"}