{"product_id":"qbp505651","title":"Perko 0300 Surface Mount Dome Light, 12V, Chrome Plated, Clear Polymer Lens","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Perko 0300 is a surface-mount dome light for boat interiors, available in three base and lens sizes with a polished chrome finish. It uses a clear polymer lens, a double-contact bayonet socket, and a push switch with a water-resistant boot, making it a practical cabin, berth, head, galley, or covered cockpit light where a low-profile round fixture is preferred.\u003c\/p\u003e\u003cp\u003eThis incandescent dome light ships with a 12V bulb and is also used in 24V and 32V installations when fitted with the proper replacement bulb for that system. Across the range, the base sizes run from 3-3\/4 inches to 6 inches, with overall depths from 1-1\/2 inches to 2 inches, so the right version depends on both the light spread needed and the available mounting space overhead or on a vertical surface.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSurface-mount round dome light for marine interior spaces such as cabins, berths, heads, galleys, companionways, and covered helm areas.\u003c\/li\u003e\n\u003cli\u003ePolished chrome-plated zinc alloy housing with a clear polymer lens for a traditional brightwork look inside the boat.\u003c\/li\u003e\n\u003cli\u003eDouble-contact bayonet socket for incandescent bulb service and straightforward bulb replacement.\u003c\/li\u003e\n\u003cli\u003ePush switch includes a water-resistant boot for easier control in damp cabin and cockpit environments.\u003c\/li\u003e\n\u003cli\u003eBlack vinyl mounting gasket helps the fixture sit cleanly against the mounting surface.\u003c\/li\u003e\n\u003cli\u003eSupplied for 12V use with bulb wattage and maximum wattage varying by size.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis dome light is offered in three size configurations. The base diameter, lens diameter, depth, bulb wattage, maximum wattage, and screw size vary by version.\u003c\/p\u003e\u003cp\u003eThe polished chrome finish, clear polymer lens, double-contact bayonet socket, black vinyl mounting gasket, and push switch with water-resistant boot remain consistent across these configurations.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e0300DP0CHR: 3-3\/4-inch base with 3-inch lens. This is the smallest version, with a 1-1\/2-inch overall depth, a 7W supplied bulb, an 11W maximum wattage, and #10 round-head screw mounting.\u003c\/li\u003e\n\u003cli\u003e0300DP1CHR: 5-inch base with 4-inch lens. This mid-size version has a 1-7\/8-inch overall depth, an 11W supplied bulb, a 17W maximum wattage, and #10 round-head screw mounting.\u003c\/li\u003e\n\u003cli\u003e0300DP2CHR: 6-inch base with 5-inch lens. This is the largest version, with a 2-inch overall depth, a 17W supplied bulb, a 17W maximum wattage, and #12 round-head screw mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBecause this is a surface-mount fixture, it is suited to flat interior mounting areas where cutting a large recess is not desired. Check the base diameter, overall depth, and screw size before replacing an older dome light, especially on headliners, wood trim, fiberglass liners, and bulkheads where existing holes may need to line up cleanly.\u003c\/p\u003e\u003cp\u003eFor electrical work, match the bulb to the vessel system voltage and protect the circuit according to the boat’s existing lighting layout. The supplied bulb is for 12V service, while 24V or 32V systems require the correct bulb for that voltage before the light is put into use.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis fixture suits owners restoring classic interiors, replacing worn cabin lights, or adding a chrome-finished dome light in areas where a switched incandescent fixture is still preferred. The larger sizes make sense where a broader lens and higher wattage are useful, while the smallest version works well in tighter spaces where overhead clearance and base diameter matter.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eUse a soft cloth and mild cleaner on the chrome-plated surface and lens. Avoid abrasive pads or harsh chemicals, since they can dull the finish and mark the polymer lens over time. Periodic checks of the switch boot, mounting screws, gasket, and bulb contact area are worthwhile on boats that see frequent humidity, salt air, and vibration.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSurface-mount dome light assembly\u003c\/li\u003e\n\u003cli\u003eClear polymer lens\u003c\/li\u003e\n\u003cli\u003eBlack vinyl mounting gasket\u003c\/li\u003e\n\u003cli\u003ePush switch with water-resistant boot\u003c\/li\u003e\n\u003cli\u003e12V bulb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Perko","offers":[{"title":"3.3\/4-Inch \/ 3-Inch","offer_id":52023137566901,"sku":"QBP505651-V2","price":71.75,"currency_code":"USD","in_stock":true},{"title":"5-Inch \/ 4-inch","offer_id":52023137599669,"sku":"QBP505651-V7","price":78.66,"currency_code":"USD","in_stock":true},{"title":"6-Inch \/ 5-Inch","offer_id":52023137632437,"sku":"QBP505651-V5","price":92.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1334615_qbp505651.jpg?v=1780191771","url":"https:\/\/www.qualityboatparts.com\/products\/qbp505651","provider":"Quality Boat Parts","version":"1.0","type":"link"}