{"product_id":"qbp503110","title":"Garmin Trolling Motor Transducer Mount, Low-Profile Design","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12105-20 is a trolling motor mount that lets you secure a compatible Garmin scanning transducer to the lower unit of a bow-mount trolling motor.\u003c\/p\u003e\u003cp\u003eThe bracket sits close to the motor housing so the transducer is less exposed to weeds, stumps, and trailer contact, while still keeping the sonar element positioned for clean readings when the trolling motor is deployed.\u003c\/p\u003e\u003cp\u003eThis mount is used with Garmin trolling motor transducers such as GT22HW-TM, GT52HW-TM, GT24UHD-TM, and GT54UHD-TM.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMounting bracket for attaching a compatible Garmin scanning transducer to a trolling motor\u003c\/li\u003e\n\u003cli\u003eLow-profile shape that keeps the transducer tucked in tight to help reduce snag and impact points\u003c\/li\u003e\n\u003cli\u003eFits Garmin trolling motor transducer models including GT22HW-TM, GT52HW-TM, GT24UHD-TM, and GT54UHD-TM\u003c\/li\u003e\n\u003cli\u003eKeeps the transducer turning with the trolling motor so the sonar view follows bow direction\u003c\/li\u003e\n\u003cli\u003eMakes it easier to route the transducer cable neatly up the trolling motor shaft with proper strain relief\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a hardware mount only. It is used when your transducer is intended for trolling motor installation and you want the transducer to steer with the motor.\u003c\/p\u003e\u003cp\u003eBefore final tightening, cycle the trolling motor through stow and deploy and full left to right steering to confirm the bracket and cable stay clear of the prop, hinge points, and any steering or lift-assist hardware.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eAttach the bracket to the trolling motor lower unit, then fasten the transducer to the bracket using the transducer mounting holes. Tighten hardware evenly so the transducer stays square and does not rotate under thrust or vibration.\u003c\/p\u003e\u003cp\u003eRoute the transducer cable up the shaft with enough slack for full steering travel, then secure it so it cannot drop into the prop. Leave a small service loop near the lower unit to reduce strain when the motor turns.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis setup is commonly used on boats that do most of their fishing from the bow, where the trolling motor is the reference point for boat control and sonar aiming. It also helps when you want quick feedback in shallow water where transom-mounted transducers may ventilate.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter trailering or rough water, check that the mount and transducer have not shifted. In saltwater, rinse and look for trapped sand around the bracket so it does not rub the cable jacket over time.\u003c\/p\u003e\u003ch6\u003eSafety notice\u003c\/h6\u003e\u003cp\u003eWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269179699381,"sku":"QBP503110","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299335_qbp503110.jpg?v=1771542358","url":"https:\/\/www.qualityboatparts.com\/products\/qbp503110","provider":"Quality Boat Parts","version":"1.0","type":"link"}