{"product_id":"qbp500560","title":"Simrad SG05 Autopilot Computer, For Volvo Penta EVC\/IPS, For AP24\/AP28 Autopilots, 12V via SimNet, IP44, Bulkhead Mount","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Simrad 24006793 is an SG05 autopilot computer and gateway that interfaces Simrad AP24 or AP28 autopilot systems with Volvo Penta Electronic Vessel Control (EVC) and IPS drives. It bulkhead-mounts in a protected location and is powered from the SimNet network at 12 V, with two SimNet ports for system wiring.\u003c\/p\u003e\u003cp\u003eThe enclosure is IP44-rated and built from polyamide, with a typical power draw of about 0.9 W. Keep the unit at least 0.5 m from a magnetic compass, and mount it where it stays out of direct washdowns.\u003c\/p\u003e\u003cp\u003eA built-in status LED flashes at 1 Hz when the unit is running, which helps with basic troubleshooting during install and service.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eGateway and steering computer for integrating AP24\/AP28 autopilot control with Volvo Penta EVC and IPS drive systems\u003c\/li\u003e\n\u003cli\u003eSimNet-powered at 12 V with a SimNet network load factor of 2\u003c\/li\u003e\n\u003cli\u003eTwo SimNet ports for input\/output on the autopilot network\u003c\/li\u003e\n\u003cli\u003eIP44 environmental protection for installation inside the boat, away from direct spray\u003c\/li\u003e\n\u003cli\u003eBulkhead mounting with connectors oriented downward for cleaner cable routing\u003c\/li\u003e\n\u003cli\u003eOperating temperature range of 0 to +55 C for typical helm and electronics spaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis unit belongs in SimNet-based Simrad autopilot systems that use AP24 or AP28 control heads and need an interface to Volvo Penta EVC. On boats with Volvo IPS, it is used as the link between the Simrad autopilot network and the Volvo drive control side.\u003c\/p\u003e\u003cp\u003eIt is one part of a complete autopilot system. Plan for the required control head, heading sensor, SimNet cabling and termination, and the appropriate Volvo Penta autopilot interface connection for the vessel.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the SG05 on a bulkhead with the SimNet connectors facing downward, then tie it into the SimNet backbone using the correct cables and terminations. Power is supplied through the 12 V SimNet feed, so the network power drop and polarity need to be correct before commissioning.\u003c\/p\u003e\u003cp\u003eThe Volvo-side connection is made using the unit’s 1 m pigtail lead to the mating connector on the Volvo autopilot interface. After wiring, configuration and sea trial steps are completed from the autopilot control head.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eIn operation, the SG05 passes steering and drive information between the Simrad autopilot and the Volvo control system so the autopilot can command the drives while still respecting the boat’s EVC environment. It suits powerboats that cruise or fish on autopilot in open water, where integration with the drive system matters as much as basic course keeping.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003ePeriodically check that the unit stays firmly mounted and that the SimNet connectors remain clean, dry, and strain-relieved. In damp compartments, use drip loops and keep the connectors pointing down to reduce the chance of moisture tracking into the ports.\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":52268986728629,"sku":"QBP500560","price":995.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298651_qbp500560.jpg?v=1771541308","url":"https:\/\/www.qualityboatparts.com\/products\/qbp500560","provider":"Quality Boat Parts","version":"1.0","type":"link"}