{"product_id":"qbp498885","title":"Perko 0063 Pipe to Hose Adapter, Cast Bronze, 90 Degree, Cast Hex","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Perko 0063 Pipe to Hose Adapter is a 90 degree cast bronze fitting used to connect matching pipe and hose sizes in marine plumbing runs. This standard-package range covers 2 inch, 2-1\/2 inch, and 3 inch configurations, with overall lengths of 7 inches, 8-1\/2 inches, and 10 inches depending on the selected variant.\u003c\/p\u003e\u003cp\u003eThe curved body helps make a clean turn where a straight fitting would put strain on the hose or take up too much space. A cast hex section gives the installer a solid wrenching surface during setup, which matters in engine rooms, bilge areas, and other tight locations where access is limited.\u003c\/p\u003e\u003cp\u003eThis fitting is a practical match for boat plumbing work where cast bronze hardware and a compact 90 degree transition are needed. It meets U.S.C.G. safety standard requirements for gasoline fuel systems under 33 CFR 183, so the selected size can be used in applications where that compliance is required and the rest of the installation is built to the proper standard.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCast bronze body for onboard plumbing where corrosion resistance is important.\u003c\/li\u003e\n\u003cli\u003eCurved 90 degree shape helps route hose from a pipe connection without forcing a sharp hose bend.\u003c\/li\u003e\n\u003cli\u003eCast hex section gives a firm wrenching point during installation.\u003c\/li\u003e\n\u003cli\u003eAvailable in matching pipe and hose sizes of 2 inch, 2-1\/2 inch, and 3 inch.\u003c\/li\u003e\n\u003cli\u003eOverall lengths range from 7 inches to 10 inches across the listed variants.\u003c\/li\u003e\n\u003cli\u003eMeets U.S.C.G. safety standard requirements for gasoline fuel systems under 33 CFR 183.\u003c\/li\u003e\n\u003cli\u003eStandard package contains 1 adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis Perko pipe to hose adapter is offered in multiple standard-package configurations for different pipe and hose sizes.\u003c\/p\u003e\u003cp\u003eAcross these variants, the cast bronze construction, cast hex, 90 degree shape, and 1-piece package remain the same. The pipe size, hose size, and overall length change by part number.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e0063009PLB: 2 inch pipe size and 2 inch hose size, with 7 inches length overall. This configuration matches plumbing runs that use 2 inch pipe and hose connections.\u003c\/li\u003e\n\u003cli\u003e0063010PLB: 2-1\/2 inch pipe size and 2-1\/2 inch hose size, with 8-1\/2 inches length overall. This configuration gives the same 90 degree transition for larger 2-1\/2 inch plumbing.\u003c\/li\u003e\n\u003cli\u003e0063011PLB: 3 inch pipe size and 3 inch hose size, with 10 inches length overall. This configuration is the largest size in this listed standard-package group.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eMatch the selected adapter to the existing pipe size and hose inside diameter before installation. The pipe and hose sizes are the same on each listed variant, so the fitting is meant for a like-size transition rather than a reducer or expander.\u003c\/p\u003e\u003cp\u003eIn tight compartments, dry-fit the adapter before final assembly to confirm hose routing, bend radius, and wrench access. The 90 degree form can help reduce hose stress when the plumbing path turns immediately after the pipe connection.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis adapter suits builders, yards, and boat owners working on marine plumbing layouts where a bronze 90 degree pipe-to-hose connection is needed. It is especially relevant in spaces where vibration, moisture, and limited access make fitting choice and hose alignment important.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003e1 Perko pipe to hose adapter in the selected size\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Perko","offers":[{"title":"7","offer_id":52581940887733,"sku":"QBP498885-V0","price":122.67,"currency_code":"USD","in_stock":false},{"title":"8-1\/2","offer_id":52581940920501,"sku":"QBP498885-V1","price":0.0,"currency_code":"USD","in_stock":false},{"title":"10","offer_id":52581940953269,"sku":"QBP498885-V2","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1334734_qbp498885.webp?v=1780201576","url":"https:\/\/www.qualityboatparts.com\/products\/qbp498885","provider":"Quality Boat Parts","version":"1.0","type":"link"}