{"product_id":"qbp494413","title":"Simrad XSONIC Airmar SS75M Thru-Hull Medium CHIRP Depth\/Temp Transducer, 600W, 80-130kHz, 9-Pin, 10m Cable","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Simrad XSONIC Airmar SS75M is a through-hull CHIRP depth and temperature transducer offered with either a 0° or 12° tilted element to match different hull deadrise angles.\u003c\/p\u003e\u003cp\u003eIt runs in the Medium CHIRP band (80 to 130 kHz) with a 600 W rating, which is a practical range for everyday bottom tracking and target detail when cruising or fishing. The low-profile housing keeps drag down, with about 5 mm extending outside the hull.\u003c\/p\u003e\u003cp\u003ePhysical size is 94 mm diameter by 134 mm, and listed weight is 1.4 kg. Beamwidth varies by frequency from 24° to 16°.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMedium CHIRP operation: 80 to 130 kHz, 600 W\u003c\/li\u003e\n\u003cli\u003eReads depth and water temperature (no speed sensor)\u003c\/li\u003e\n\u003cli\u003eThrough-hull mounting with a low-profile exterior (about 5 mm proud of the hull)\u003c\/li\u003e\n\u003cli\u003eBeamwidth from 24° to 16° across the band\u003c\/li\u003e\n\u003cli\u003e9-pin xSonic connection with a 10 m cable\u003c\/li\u003e\n\u003cli\u003eTwo tilt choices to help keep the acoustic element pointing down on different hull deadrise angles\u003c\/li\u003e\n\u003cli\u003eListed dimensions: 94 mm diameter by 134 mm; listed weight: 1.4 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis transducer is offered in multiple configurations based on the element tilt angle.\u003c\/p\u003e\u003cp\u003eThe main difference between variants is the built-in tilt (0° or 12°), which is used to compensate for hull deadrise so the transducer can transmit and receive closer to straight down.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e000-13908-001: Tilt 0°. Suits hulls with 0° to 14° deadrise where a non-tilted element aligns well with the waterline.\u003c\/li\u003e\n\u003cli\u003e000-13909-001: Tilt 12°. Suits hulls with 8° to 15° deadrise where the built-in tilt helps keep the beam oriented downward.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a 9-pin xSonic transducer, so it mates with compatible Simrad sonar displays and modules that accept an xSonic 9-pin transducer input. If your system uses a different connector style, plan on the correct adapter before installation.\u003c\/p\u003e\u003cp\u003eBecause it is a through-hull install, confirm you have clear access on the inside of the hull for the 134 mm body and for routing the cable without tight bends.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eTransducer performance depends heavily on placement. A clean-water location is typically away from strakes, steps, intakes, and anything that aerates the flow, and on a solid section of hull that stays in the water at speed.\u003c\/p\u003e\u003cp\u003eFollow standard through-hull practices for your hull type, including sealing any exposed core and bedding the fitting with a marine sealant that matches your hull material and the transducer housing.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis setup is a good match for boats that want a fixed, low-drag through-hull sensor for consistent depth tracking underway, along with a built-in temperature readout for fishing and general situational awareness.\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"12°","offer_id":52271177695413,"sku":"QBP494413-V1","price":966.71,"currency_code":"USD","in_stock":false},{"title":"0°","offer_id":52271177728181,"sku":"QBP494413-V2","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1307842_qbp494413.png?v=1771553291","url":"https:\/\/www.qualityboatparts.com\/products\/qbp494413","provider":"Quality Boat Parts","version":"1.0","type":"link"}