{"product_id":"qbp479039","title":"Garmin Right-Angle NMEA 0183 Audio\/Data Cable, For GPSMAP 84\/86 17-24 in, 7 ft, RCA Audio, Bare Wire","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12390-21 is a 7-foot NMEA 0183 data cable with an RCA audio connection and a right-angle plug for tighter installs behind a flush-mounted display.\u003c\/p\u003e\u003cp\u003eIt gives you bare-wire leads for NMEA 0183 wiring, plus a separate RCA connector for feeding audio into a stereo input (including FUSION setups). This is a common need at the helm when a chartplotter is tied into older NMEA 0183 gear and you also want audio routed into the boat’s sound system instead of relying on the unit’s local output.\u003c\/p\u003e\u003cp\u003eThe right-angle connector helps when there is very little clearance behind the mounting surface, reducing bend radius and strain on the plug when the display is pushed into place.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e7 ft cable length for routing from the back of the display to a terminal strip, junction point, or nearby equipment bay\u003c\/li\u003e\n\u003cli\u003eRight-angle connector at the display end to make flush-mount installations easier in tight helm spaces\u003c\/li\u003e\n\u003cli\u003eBare-wire NMEA 0183 leads for direct connection to compatible NMEA 0183 devices and harnesses\u003c\/li\u003e\n\u003cli\u003eRCA audio connector for tying chartplotter audio into a stereo input, including FUSION systems\u003c\/li\u003e\n\u003cli\u003eCompatible with Garmin GPSMAP 8400\/8600 series chartplotters, including GPSMAP 8417\/8422\/8424 and GPSMAP 8617\/8622\/8624\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is intended for GPSMAP 8400\/8600 family installations that use the NMEA 0183 and audio connections. The right-angle plug is most useful when the unit is flush mounted and the cable must exit immediately into a shallow space behind the panel.\u003c\/p\u003e\u003cp\u003eIf your boat is wired around NMEA 2000 only, this is not a substitute for a NMEA 2000 drop cable. It is for NMEA 0183 signal wiring and an analog audio connection via RCA.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the run so the cable stays supported behind the helm and is not left hanging from the connector. Leave a small service loop so the display can be pulled for access without tugging the wiring.\u003c\/p\u003e\u003cp\u003eTerminate the bare-wire NMEA 0183 leads using marine heat-shrink butt connectors or into a labeled terminal block, and keep splices up high where they stay dry. Route the RCA lead away from high-current power wiring when possible to avoid noise getting into the audio line.\u003c\/p\u003e\u003ch6\u003eWho it suits\u003c\/h6\u003e\u003cp\u003eThis cable is a good match for boats with a flush-mounted GPSMAP 8400\/8600 at the helm where clearance is tight and the install calls for both NMEA 0183 connections and a clean audio feed into the stereo system.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269162692789,"sku":"QBP479039","price":39.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299045_qbp479039.jpg?v=1771542283","url":"https:\/\/www.qualityboatparts.com\/products\/qbp479039","provider":"Quality Boat Parts","version":"1.0","type":"link"}