{"product_id":"qbp475089","title":"Raymarine RealVision 25-Pin Locking Collar Kit","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine R70615 is a replacement locking collar kit for Raymarine RealVision 25-pin transducer cable connections. It is used where the collar on a RealVision cable connector needs to be replaced, refitted, or kept as a spare during electronics installation work.\u003c\/p\u003e\u003cp\u003eThis collar is part of the mechanical connection between a RealVision 3D transducer cable and the matching 25-pin RealVision transducer port. Once the connector is correctly oriented and fully seated, the collar is turned clockwise to lock the cable in place, helping keep the connection secure behind the display or sonar module.\u003c\/p\u003e\u003cp\u003eFor boat owners, installers, and service technicians, this is a small but important part when routing transducer cables through bulkheads, consoles, or helm stations. It is especially useful during refits, cable re-runs, and repairs where the original locking collar is missing or damaged.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits Raymarine RealVision 25-pin transducer cable connections.\u003c\/li\u003e\n\u003cli\u003eReplacement collar kit for securing the cable connector at the RealVision transducer port.\u003c\/li\u003e\n\u003cli\u003eUseful when a transducer cable has been routed through bulkheads and the locking collar needs to be installed or replaced afterward.\u003c\/li\u003e\n\u003cli\u003eSupports a proper mechanical connection by allowing the cable connector to be locked after it is fully seated.\u003c\/li\u003e\n\u003cli\u003eCompact spare part for helm electronics service kits, refits, and onboard troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eBefore working on the transducer connection, power down the connected display or sonar module. Check the cable connector orientation, push the connector fully into the matching RealVision 25-pin port, then turn the locking collar clockwise until the connection is secure.\u003c\/p\u003e\u003cp\u003eThis part is most often handled behind the helm, inside an electronics box, or near a sonar module, where access can be tight. Leaving enough service loop in the cable makes it easier to seat the connector correctly and avoid strain on the cable while tightening the collar.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis kit is for Raymarine RealVision 25-pin cable connections. It is not a general GPS mount, power connector, or NMEA network part. Match it to the RealVision 25-pin transducer connection on the boat before ordering, especially when servicing mixed electronics systems or older installations.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a practical spare for boats running Raymarine RealVision sonar where transducer cables pass through consoles, lockers, or bulkheads during installation. It suits owners and installers who need to restore the locking function of the cable connection without replacing the full transducer cable.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":52024098226357,"sku":"QBP475089","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330535_qbp475089.jpg?v=1780192105","url":"https:\/\/www.qualityboatparts.com\/products\/qbp475089","provider":"Quality Boat Parts","version":"1.0","type":"link"}