{"product_id":"qbp465254","title":"Hella Marine 2-Pole Water Resistant Socket, Chrome Brass, 12V 10A, Screw Terminals, Plastic Cap Included","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Hella Marine 950987002 is a warm white LED deck floodlight with a white housing, built for exterior mounting on boats and other marine equipment. It runs on 9-33V DC so it fits both 12V and 24V systems, and the sealed IP67 body is suited to washdowns and wet weather.\u003c\/p\u003e\u003cp\u003eThis style of light is commonly mounted as a deck or spreader light to cover a working area without the harsh look of cool white. Warm white around 2700K keeps glare down when you are docking at night, rigging sails, or moving around the cockpit.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eWarm white output (2700K) for deck lighting that stays comfortable on the eyes at night.\u003c\/li\u003e\n\u003cli\u003eInput voltage range of 9-33V DC for 12V and 24V electrical systems.\u003c\/li\u003e\n\u003cli\u003eTwo intensity levels, high (12W) and low (2W), using separate positive feeds.\u003c\/li\u003e\n\u003cli\u003eIP67 sealed construction for exposed installations on decks, hardtops, arches, and masts.\u003c\/li\u003e\n\u003cli\u003ePolished 316 stainless steel mounting bracket with adjustable friction mounts for aiming.\u003c\/li\u003e\n\u003cli\u003eThermally conductive, non-metal housing with a heavy duty Grilamid lens.\u003c\/li\u003e\n\u003cli\u003ePre-wired with tinned marine cable; protect the circuit with a 5A max fuse.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe bracket supports upright or pendant mounting. Allow room to tilt the lamp and keep the fasteners accessible so you can fine-tune the aim after the first night run. Overall size is approximately 170 mm long by 68 mm high by 58 mm deep, which helps when checking fit on a mast spreader, radar arch, or hardtop.\u003c\/p\u003e\u003cp\u003eSwivel resistance is set by the end-cap screws on each side. Tighten both sides evenly so the lamp holds position in vibration without binding.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eOn white-housing models, the white wire is negative (-). The red wire is the positive feed for high intensity, and the brown wire is the positive feed for low intensity. Switching between modes can be handled with a standard ON\/OFF\/ON switch.\u003c\/p\u003e\u003cp\u003eThe LED module is polarity conscious, so reverse polarity will stop it from operating but will not damage it. For a clean, long-term install, solder connections where appropriate and seal splices with heat-shrink.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis light makes sense anywhere you want a wide, close-range flood, such as the aft cockpit, swim platform area, side decks, or under a spreader. It is also a practical choice for crews who want a lower setting for dockside checks and a brighter setting when you are actually working on deck.\u003c\/p\u003e\u003ch6\u003eMaterials and corrosion resistance\u003c\/h6\u003e\u003cp\u003eThe non-metal, thermally conductive housing avoids corrosion issues common to metal-bodied lights in saltwater service, and it tolerates long-term UV exposure. The 316 stainless bracket handles exterior mounting, and the Grilamid lens is built to take impact while standing up to UV and common onboard chemicals.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt residue off the lens and bracket during routine washdowns. Periodically check that the bracket screws stay snug and that the cable entry and splices remain sealed, especially on mast and hardtop installs that see constant vibration.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e950987002\u003c\/span\u003e","brand":"Hella Marine","offers":[{"title":"Default Title","offer_id":53721605210293,"sku":"QBP465254","price":14.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/0693996_qbp465254_jpeg.jpg?v=1794119381","url":"https:\/\/www.qualityboatparts.com\/products\/qbp465254","provider":"Quality Boat Parts","version":"1.0","type":"link"}