{"product_id":"qbp452869","title":"TACO Marine P10 Marine Lumber, 12 x 27 x 1\/2 in, Seafoam StarBoard","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine P10-5012SFM27-1C is a 12 inch x 27 inch x 1\/2 inch Seafoam King StarBoard polymer sheet for building, repairing, or replacing boat parts where wood, laminate, or general plastic would not hold up well. It is a practical cut-size panel for small fabrication work around consoles, cockpit areas, storage compartments, tackle stations, and other exposed spaces on board.\u003c\/p\u003e\u003cp\u003eThis marine lumber is made from high-density polyethylene with UV-stabilized material for use around sun, spray, saltwater, and humidity. It will not rot, warp, swell, splinter, or delaminate when exposed to water, which makes it a strong fit for boat projects that need a clean finish without painting or sealing.\u003c\/p\u003e\u003cp\u003eThe Seafoam color works well when a lighter, softer finish is preferred over bright white or black. The sheet can be cut, routed, drilled, and shaped with standard woodworking tools, so it suits both repair shops and owners handling measured upgrades on their own boats.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12 inch x 27 inch x 1\/2 inch cut-size sheet for small marine fabrication and replacement jobs.\u003c\/li\u003e\n\u003cli\u003eSeafoam King StarBoard polymer gives boat projects a light finish that blends well with many cockpit, console, and interior surfaces.\u003c\/li\u003e\n\u003cli\u003eHigh-density polyethylene construction handles wet marine areas better than wood, laminate, or many general-purpose plastics.\u003c\/li\u003e\n\u003cli\u003eUV-stabilized material helps the sheet stand up to sun exposure during deck, cockpit, and dockside use.\u003c\/li\u003e\n\u003cli\u003eWill not rot, warp, swell, splinter, or delaminate when exposed to water or humidity.\u003c\/li\u003e\n\u003cli\u003eCan be cut, drilled, routed, and shaped with standard woodworking tools for custom panels, trim pieces, brackets, covers, and accessory mounts.\u003c\/li\u003e\n\u003cli\u003eRequires little to no finishing, so there is no need for paint, varnish, or sealing for normal marine use.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a three-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fabrication\u003c\/h6\u003e\u003cp\u003eMeasure the mounting area carefully before cutting, especially around curved consoles, hatches, electronics spaces, and hardware clearances. The 1\/2 inch thickness gives a useful balance of rigidity and workability for many small panels and boat accessory projects.\u003c\/p\u003e\u003cp\u003eUse clean cutting tools and support the sheet during fabrication to keep edges even. Holes can be drilled for fasteners, switches, hinges, or brackets, and exposed edges can be eased or shaped for a more finished look.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis sheet is well suited for replacing small worn wood or laminate pieces, making custom covers, creating backing panels, trimming storage areas, or adding a clean mounting surface for accessories. It is also useful for fishing boats, center consoles, cruisers, and sailboats where parts see regular moisture and sun.\u003c\/p\u003e\u003cp\u003eFor structural loads, hinge points, or hardware that will be pulled under force, match the fasteners and backing method to the job and the boat surface. The material works well for many onboard fabrication tasks, but proper support and fastening are still important for long-term service.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRoutine cleaning is usually simple. Rinse away salt and dirt, then wash with mild soap and water as needed. Because the material does not require paint or varnish, upkeep is mainly about keeping the surface clean and checking mounted hardware during normal boat maintenance.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023072981173,"sku":"QBP452869","price":68.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331740_qbp452869.jpg?v=1780191662","url":"https:\/\/www.qualityboatparts.com\/products\/qbp452869","provider":"Quality Boat Parts","version":"1.0","type":"link"}