{"product_id":"qbp431586","title":"Lumitec NevisLT LED Engine Room Light, Ignition Protected, 10-30V, 1000 lm","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101296 is a high-output LED engine room and utility light that throws 1000 lumens of white light across a 180-degree spread. It runs on 10 to 30 VDC and is sealed to an IP67 rating for bilge splash, washdowns, and the damp air that lives in lockers and machinery spaces.\u003c\/p\u003e\u003cp\u003eThe housing is a compact 5 in wide, 2.5 in high, and 0.63 in deep, so it fits where longer strip lights do not. Light color is 5000K with a CRI of 70+, which helps when you are tracing wire colors, reading labels, or spotting leaks.\u003c\/p\u003e\u003cp\u003eIt is ignition protected for installation in mechanical spaces and compartments, including gasoline engine areas. Power draw is about 1.3A on a 12V system and 600mA on a 24V system.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1000 integrating-sphere tested lumens with a 180-degree beam to light up wide, hard-to-reach corners\u003c\/li\u003e\n\u003cli\u003e10 to 30 VDC input for common 12V and 24V onboard systems\u003c\/li\u003e\n\u003cli\u003eIP67 sealed enclosure for wet compartments and routine washdowns\u003c\/li\u003e\n\u003cli\u003eIgnition protected for use in mechanical spaces and gasoline engine compartments\u003c\/li\u003e\n\u003cli\u003e5000K white output with CRI 70+ for clearer visibility when servicing equipment\u003c\/li\u003e\n\u003cli\u003eCompact footprint: 5 in x 2.5 in face and 0.63 in depth\u003c\/li\u003e\n\u003cli\u003eWorks with most PWM LED dimmers for installations that want light level control from the circuit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNevisLT light fixture\u003c\/li\u003e\n\u003cli\u003e#6 self-tapping mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the light to a flat surface using the supplied screws, and plan your wire routing before drilling. The wiring can pass through a wire exit behind the fixture, or it can be run along the mounting surface if that suits your installation.\u003c\/p\u003e\u003cp\u003eThe unit can get warm during normal use. Avoid placing it in a tight pocket that blocks airflow, since restricted ventilation can trigger a thermal reduction or shutdown until it cools.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eConnect to DC power with correct polarity, since the device is polarity sensitive. Protect the circuit with an appropriately sized fuse or breaker, and size wire gauge for the run length and load, especially when multiple lights share one circuit.\u003c\/p\u003e\u003cp\u003eFor engine rooms and other damp spaces, sealed wire-to-wire connections help prevent corrosion at the splice point.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe face measures 5.00 in by 2.50 in, with mounting hole centers spaced about 4.37 in (lengthwise) and 1.88 in (heightwise). With a 0.63 in depth, it works well under deck plates, inside lazarettes, under gunwales, and on bulkheads where clearance is limited.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis light is a solid match for owners who need a bright service light for filters, pumps, strainers, and electrical panels in cramped compartments. It also works well in storage lockers and utility spaces where a wide beam helps reduce shadows.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eSince the housing is sealed, routine care is mostly a wipe-down and a quick check that wiring, splices, and fasteners stay tight after seasonal vibration and heat cycles.\u003c\/p\u003e\u003ch6\u003eSafety and compliance\u003c\/h6\u003e\u003cp\u003eThis product carries a California Proposition 65 warning for cancer and reproductive harm.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268887769269,"sku":"QBP431586","price":173.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298187_qbp431586.jpg?v=1771540646","url":"https:\/\/www.qualityboatparts.com\/products\/qbp431586","provider":"Quality Boat Parts","version":"1.0","type":"link"}