{"product_id":"qbp431060","title":"TACO Marine Large SuproFlex Rub Rail, 2.5 in x 1 in, 100 ft, Co-Extruded Vinyl","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine Large SuproFlex Rub Rail is a semi-rigid vinyl rub rail for replacing or upgrading hull protection on medium to large boats. This Large V11-9970 profile measures 2.5 in. x 1 in. and is supplied in 100 ft. lengths, giving installers enough material for a clean run around many center consoles, fishing boats, cruisers, and similar hulls.\u003c\/p\u003e\u003cp\u003eIts co-extruded construction combines a rigid backing with a softer front face, so the rail can follow the shape of the hull while still giving the boat a protective edge at docks, pilings, and alongside other vessels. Shock-absorbing channels help manage contact at the rub rail instead of transferring every bump straight to the hull joint.\u003c\/p\u003e\u003cp\u003eSuproFlex is a practical choice for refits because it needs no pre-forming and only minimal heating for tighter bends. That can make a noticeable difference when working around bows, transoms, and molded hull curves where traditional rigid rub rail can take more time and more hands to install.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLarge 2.5 in. x 1 in. SuproFlex profile suited to many medium and large boat rub rail replacements.\u003c\/li\u003e\n\u003cli\u003e100 ft. continuous length helps reduce seams for a cleaner perimeter installation.\u003c\/li\u003e\n\u003cli\u003eCo-extruded vinyl uses two hardness levels, with a rigid backing and softer front face for impact protection.\u003c\/li\u003e\n\u003cli\u003eShock-absorbing channels add protection where the hull is most likely to meet docks, pilings, and rafted boats.\u003c\/li\u003e\n\u003cli\u003eNo pre-forming is required, and only minimal heating is needed for tight bends during installation.\u003c\/li\u003e\n\u003cli\u003ePairs with TACO Marine V12-9980 Flex Chrome Insert, sold separately, for a finished insert channel.\u003c\/li\u003e\n\u003cli\u003eUses #10 screws at 4 in. on center for standard fastening layout.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis rub rail is offered in two color configurations for matching the look of the hull, deck joint, and existing trim.\u003c\/p\u003e\u003cp\u003eThe profile, 100 ft. length, insert compatibility, and screw spacing remain the same across these listed variants. The visible rub rail color is the main difference.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV11-9970WHA100D: Arctic White. This finish keeps the rail visually close to many white gelcoat hulls and gives the boat a clean replacement look after a rub rail refit.\u003c\/li\u003e\n\u003cli\u003eV11-9970BKA100-1: Black. This color gives the hull edge a stronger visual outline and works well when the boat already uses black trim, black hardware accents, or a darker rub rail.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis rail is made for installers who need a profile that can follow common hull shapes without the extra work of pre-forming. Minimal heat may still be useful around tighter bends, especially near the bow or molded corners, but the flexible SuproFlex body helps the rail sit cleanly along the hull-to-deck joint.\u003c\/p\u003e\u003cp\u003eFor a proper installation, plan the screw spacing before starting the run and confirm that the V12-9980 insert matches the finish and appearance you want. The insert is sold separately, so it should be selected as part of the full rub rail job rather than treated as an included item.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis Large SuproFlex rub rail fits boat owners and yards handling a full perimeter replacement, collision damage repair, or a cosmetic refresh where the existing rub rail is worn, faded, cracked, or no longer protecting the hull edge well. It makes sense for boats that spend time docking, rafting up, trailering, or working around pilings where the outer edge of the hull sees regular contact.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Arctic White","offer_id":52023071572149,"sku":"QBP431060-V7","price":0.0,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":52023071604917,"sku":"QBP431060-V3","price":805.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335304_qbp431060.jpg?v=1780191657","url":"https:\/\/www.qualityboatparts.com\/products\/qbp431060","provider":"Quality Boat Parts","version":"1.0","type":"link"}