{"product_id":"qbp392338","title":"Garmin Marine Heading Sensor Cable, NMEA 2000, 6 m","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11419-00 is a 19.7 ft (6 m) NMEA 2000 cable used to connect a marine heading sensor to an NMEA 2000 network. It gives you enough length to mount the sensor where it can read clean heading data while still reaching the nearest backbone connection point.\u003c\/p\u003e\u003cp\u003eOn most boats, the heading sensor ends up away from the main electronics hub to reduce magnetic interference and vibration effects. This cable is meant for that real-world routing, from a sensor location under a berth or console to the closest NMEA 2000 T-connector on the backbone.\u003c\/p\u003e\u003cp\u003eThis is a good match for vessels that already have an NMEA 2000 backbone in place and need a 6 m run to tie a heading sensor into the network for navigation and autopilot use.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNMEA 2000 network cable for connecting a marine heading sensor into an NMEA 2000 backbone\u003c\/li\u003e\n\u003cli\u003e19.7 ft (6 m) length for runs from the sensor mounting area to the nearest T-connector or backbone location\u003c\/li\u003e\n\u003cli\u003eHelps keep sensor placement flexible when the backbone is not close to the preferred mounting spot\u003c\/li\u003e\n\u003cli\u003eUseful for clean cable routing through bulkheads, under decks, and behind helm stations where extra length matters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is intended for installations where the heading sensor connects through NMEA 2000. Before ordering, confirm your boat has an NMEA 2000 backbone with a free connection point and that the cable run length makes sense for your planned sensor mounting location.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the route first, then secure the cable so it will not rub on sharp fiberglass edges or get pulled tight when panels are opened. Leave gentle service loops at the sensor and at the network connection point so the connectors are not under constant strain.\u003c\/p\u003e\u003cp\u003eWhen routing through bilges, consoles, or lockers, keep the cable away from high-current wiring and sources of electrical noise where possible, and use proper chafe protection at every pass-through. A drip loop near the sensor and at the network connection helps reduce the chance of water tracking into connectors.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eCommon installs include mounting a heading sensor in a dry, central location and running this cable back to the backbone under the helm, behind a navigation station, or inside an electronics locker. It is also helpful on larger center consoles and sportfishers where the backbone is concentrated at the dash but the best sensor location is several meters away.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52268990693557,"sku":"QBP392338","price":109.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298767_qbp392338.jpg?v=1771541334","url":"https:\/\/www.qualityboatparts.com\/products\/qbp392338","provider":"Quality Boat Parts","version":"1.0","type":"link"}