{"product_id":"qbp372630","title":"Raymarine RVM-100 All-in-One Transom Mount Transducer, For Axiom 2 Pro and RVM-1600, RealVision MAX, 4-Channel CHIRP, AHRS, 8m Cable","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine A80703 is an RVM-100 all-in-one transom mount transducer for Raymarine RealVision MAX sonar systems, including Axiom 2 Pro RVM displays and RVM-1600 sonar systems. It combines RealVision Max 3D, SideVision, DownVision, and Conical High CHIRP sonar in one transom-mounted unit, with Conical High CHIRP rated at 600 W at 200 kHz and an 8 m (26.2 ft) cable for routing back to the display or sonar module.\u003c\/p\u003e\u003cp\u003eThis transducer is a practical match for outboard-powered motor boats where a transom installation keeps the sonar element in clean water behind the hull. Built-in AHRS helps stabilize 3D sonar imagery as the boat moves through chop, turns, and changing trim, while the fast-response water temperature sensor adds useful data for fishing and general situational awareness.\u003c\/p\u003e\u003cp\u003eThe RVM-100 gives anglers and boaters one sensor for structure scanning, side-looking coverage, down-looking detail, 3D imaging, fish targeting, and temperature. Actual sonar returns depend on installation, speed, water conditions, bottom type, and depth, so careful transom placement matters.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAll-in-one RealVision MAX transducer with RealVision Max 3D, SideVision, DownVision, and Conical High CHIRP sonar channels.\u003c\/li\u003e\n\u003cli\u003eConical High CHIRP output rated at 600 W at 200 kHz with a 12 degree beam width.\u003c\/li\u003e\n\u003cli\u003eBuilt-in AHRS sensor helps compensate for boat motion in 3D sonar views.\u003c\/li\u003e\n\u003cli\u003eBuilt-in fast-response water temperature sensor for quick temperature readings at the transducer.\u003c\/li\u003e\n\u003cli\u003e8 m (26.2 ft) cable gives useful routing length for transom installations on many trailerable and outboard-powered boats.\u003c\/li\u003e\n\u003cli\u003eStainless steel transom mounting bracket includes integrated kick-up protection for impacts with floating debris, rocks, or stumps.\u003c\/li\u003e\n\u003cli\u003eWaterproof ratings of IPX6, IPX7, and IPX8 support use in wet marine locations, with IPX6 applying to surfaces exterior to the hull.\u003c\/li\u003e\n\u003cli\u003eSonar range ratings reach 365 m (1,200 ft) for CHIRP, 182 m (600 ft) for DownVision, and 91 m (300 ft) for SideVision and RealVision Max 3D.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe RVM-100 works with Raymarine RealVision MAX compatible sonar modules and RealVision MAX equipped chartplotters. It is made for transom mounting on outboard-powered motor boats, which makes it a common fit for fishing boats, skiffs, flats boats, and other planing hulls where the transom location can stay in solid water while underway.\u003c\/p\u003e\u003cp\u003eFor hulls where a standard transom bracket is not the right fit, optional mounting accessories are available for jack plate, stepped hull, and trolling motor applications. Those accessories should be matched to the vessel before installation, especially when hull shape, engine setback, or running surface makes transom placement difficult.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe supplied 8 m cable should be routed with protection from chafe, heat, sharp bends, and moving gear. The included cable connector kit, escutcheon plate, cable clips, fasteners, and bracket hardware support a clean installation when the cable path and mounting location are planned before drilling.\u003c\/p\u003e\u003cp\u003eAfter mounting, the transducer position should be tested on the water and adjusted as needed for consistent bottom tracking and sonar returns. Small changes in height or angle can make a noticeable difference on transom-mounted sonar, especially on faster outboard boats where aerated water can pass across the face of the transducer.\u003c\/p\u003e\u003ch6\u003eMaterials and environment\u003c\/h6\u003e\u003cp\u003eThe transducer body uses plastic construction, and the supplied mounting bracket is stainless steel. The unit measures 256.6 mm (10.10 in) long by 120.5 mm (4.74 in) high and weighs 0.647 kg (1.42 lb) including the brackets.\u003c\/p\u003e\u003cp\u003eOperating temperature range is -2°C (28.4°F) to +55°C (131°F), with storage temperature range from -20°C (23°F) to +70°C (158°F). The IPX6, IPX7, and IPX8 ratings make the unit suitable for the wet, exposed environment around a boat transom when installed correctly.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis transducer suits boat owners who want Raymarine RealVision MAX sonar from a single transom-mounted sensor rather than separate elements for different sonar views. It is especially useful for anglers who use side scanning to read structure, DownVision for detail below the boat, 3D sonar for a wider picture of the bottom, and CHIRP fish targeting for returns in the water column.\u003c\/p\u003e\u003cp\u003eIt also fits boaters upgrading an Axiom 2 Pro RVM or RVM-1600 sonar setup who need a matching RealVision MAX transducer with temperature sensing and motion-stabilized 3D imaging.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRVM-100 transducer with 8 m (26.2 ft) cable.\u003c\/li\u003e\n\u003cli\u003eTransducer mounting bracket.\u003c\/li\u003e\n\u003cli\u003eEscutcheon plate.\u003c\/li\u003e\n\u003cli\u003eFive cable clips.\u003c\/li\u003e\n\u003cli\u003eCable connector kit with O-ring, two split rings, locking collar, and split ring fitting tool.\u003c\/li\u003e\n\u003cli\u003eNine 3.9 x 13 self-tapping screws for the escutcheon and cable clips.\u003c\/li\u003e\n\u003cli\u003eThree 4.2 x 18 self-tapping screws for the transducer mounting bracket.\u003c\/li\u003e\n\u003cli\u003eM10 x 65 serrated bolt.\u003c\/li\u003e\n\u003cli\u003eM10 serrated nylock nut.\u003c\/li\u003e\n\u003cli\u003eDocumentation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":52023857348789,"sku":"QBP372630","price":694.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330874_qbp372630.jpg?v=1780192047","url":"https:\/\/www.qualityboatparts.com\/products\/qbp372630","provider":"Quality Boat Parts","version":"1.0","type":"link"}