{"product_id":"qbp369841","title":"Garmin Split Collar Cable Connector, 11 mm","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11170-01 is a split connector collar for 11 mm Garmin cables that lets you route wiring through a smaller pass-through instead of drilling a large hole to fit the plug.\u003c\/p\u003e\u003cp\u003eIt is used on Garmin installations that rely on a threaded locking collar connection, including threaded RJ45-style network leads and other Garmin cables that secure with threads at the device end. Because the collar is split, you can pull the cable first and assemble the collar afterward, which is helpful on refits and tight helm layouts.\u003c\/p\u003e\u003cp\u003eConfirm fit by checking that your cable jacket measures about 11 mm where the collar will sit and that the mating connection uses a threaded lock. If the connector is a friction-fit style with no threads, this collar will not attach.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e11 mm split collar format to keep cable pass-through holes smaller\u003c\/li\u003e\n\u003cli\u003eThreaded locking collar style for Garmin connections that secure with threads\u003c\/li\u003e\n\u003cli\u003eSplit construction allows assembly after the cable has been routed\u003c\/li\u003e\n\u003cli\u003eUseful replacement when the original collar is missing, cracked, or stripped\u003c\/li\u003e\n\u003cli\u003eBlack finish that blends in behind the dash and inside conduits\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFit depends on two things: cable outside diameter and the connector locking style. This part matches Garmin cables that use an 11 mm collar and a threaded lock at the connection point. It is not meant for friction-fit connectors that do not have a threaded port to screw onto.\u003c\/p\u003e\u003cp\u003eOn mixed electronics systems, it is worth checking each cable run individually. Some boats have a combination of threaded and non-threaded Garmin leads depending on the device generation and cable type.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eRoute the cable through the bulkhead, panel, or rigging tube first, then assemble the split collar around the cable jacket. Once assembled, thread the collar onto the matching threaded connection and hand-tighten until it seats.\u003c\/p\u003e\u003cp\u003eFor installations exposed to washdowns or spray, treat the pass-through like any other deck or bulkhead penetration: seal the cutout appropriately and add strain relief so vibration and cable weight are not carried by the connector.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis collar is commonly used when running Garmin network or transducer cabling behind the helm, through console rigging, or across a bulkhead where you want to keep hole sizes down. It is a good match for boats with limited access behind the panel where pulling a large connector through the structure would be difficult.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52268968214709,"sku":"QBP369841","price":1.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298801_qbp369841.jpg?v=1771541121","url":"https:\/\/www.qualityboatparts.com\/products\/qbp369841","provider":"Quality Boat Parts","version":"1.0","type":"link"}