{"product_id":"qbp365274","title":"TACO Marine Rub Rail End Cap, 1-7\/8 in, 316 Stainless Steel, Polished","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-0039 is a stainless steel rub rail end cap for finishing the end of a 1-7\/8\" rub rail installation. It gives the stern end of the rail a clean termination point while helping keep the rub rail insert seated and protected at the exposed end.\u003c\/p\u003e\u003cp\u003eThis end cap is made from Type 316L stainless steel with a polished finish, a good match for boats that see saltwater, spray, dock contact, and routine washdowns. Its listed dimensions are 2-19\/64\" long, 25\/32\" high, and 1-7\/8\" wide, and it uses a #10 screw for fastening.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits 1-7\/8\" rub rail applications where the end of the rail needs a finished cap\u003c\/li\u003e\n\u003cli\u003eMade from Type 316L stainless steel for corrosion resistance in marine environments\u003c\/li\u003e\n\u003cli\u003ePolished finish helps the end cap blend with stainless rub rail hardware and trim\u003c\/li\u003e\n\u003cli\u003eCaps the stern end of the rub rail and helps keep the insert from working loose\u003c\/li\u003e\n\u003cli\u003eMeasures 2-19\/64\" long, 25\/32\" high, and 1-7\/8\" wide for fit checks before installation\u003c\/li\u003e\n\u003cli\u003eUses a #10 screw, making it straightforward to match with common rub rail fastening hardware\u003c\/li\u003e\n\u003cli\u003eBacked by a five-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis end cap is listed for use with several TACO rub rail profiles, including V21-1039, V21-9647, V21-9659, V21-9662, V21-9811, and V21-9866. Fit should be checked against the existing rail profile before drilling, especially on older boats where rub rail sections may have been replaced or modified over time.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThe end cap is typically installed at the stern end of the rub rail after the rail and insert are seated. A dry fit before fastening helps confirm the cap sits flush, covers the cut end cleanly, and does not pinch the insert out of shape.\u003c\/p\u003e\u003cp\u003eIt is a practical finishing part for refits, collision repairs, rub rail replacement, or cosmetic cleanup where the exposed end of the rail needs protection and a neater appearance. Boat owners working on center consoles, bay boats, cruisers, and similar fiberglass hulls can use it to complete the rub rail run without leaving the insert edge open to movement or damage.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the end cap with fresh water after saltwater use and avoid harsh cleaners that can dull the polished stainless finish. During seasonal service, check that the fastener remains tight and that the rub rail insert is still seated properly behind the cap.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023079403701,"sku":"QBP365274","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331596_qbp365274.jpg?v=1780191674","url":"https:\/\/www.qualityboatparts.com\/products\/qbp365274","provider":"Quality Boat Parts","version":"1.0","type":"link"}