{"product_id":"qbp341125","title":"Garmin Suction Cup Mount, Windshield\/Flat Surface, 17 mm Ball Joint","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11932-01 is a suction cup mount that lets you position a compatible Garmin navigator on a windshield or any smooth, flat surface.\u003c\/p\u003e\u003cp\u003eIt uses a 0.67 in (17 mm) ball joint, so it matches Garmin cradles and brackets that clamp to the common 17 mm ball size. On a boat, it is most practical for temporary setups at an enclosed helm or inside the cabin where the surface stays clean and dry.\u003c\/p\u003e\u003cp\u003eThe navigation device is not included, which makes this a straightforward spare mount or an easy way to move an existing unit between vehicles and the boat.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSuction-cup base attaches to smooth, flat surfaces such as glass or polished fiberglass for a removable mount point\u003c\/li\u003e\n\u003cli\u003e0.67 in (17 mm) ball joint interface for Garmin mounts that use the 17 mm ball standard\u003c\/li\u003e\n\u003cli\u003eBall-and-socket adjustment makes it easier to aim the screen and manage glare at the helm\u003c\/li\u003e\n\u003cli\u003eNo-drill mounting option for short-term installs, rentals, or moving a portable navigator between boats\u003c\/li\u003e\n\u003cli\u003eUseful as a spare mount location so the device can be stowed quickly when leaving the vessel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eStart with a clean surface that is free of dust, sunscreen, and salt residue, then press the suction cup firmly and lock it in place. A lightly dampened surface can help it seal on glass, but standing water will make it slip.\u003c\/p\u003e\u003cp\u003eOnce mounted, attach your Garmin cradle or bracket to the ball joint, set the viewing angle, and re-check the hold after a few minutes of vibration. Temperature swings and hull pounding can loosen suction mounts over time, so a quick check before getting underway is worth it.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mount is built around the 17 mm ball joint size. It is intended for Garmin navigator mounts and cradles that clamp onto a 17 mm ball. If your existing bracket uses a different ball size, it will not seat correctly.\u003c\/p\u003e\u003ch6\u003eUse notes on board\u003c\/h6\u003e\u003cp\u003eFor open cockpits and wet decks, a suction cup mount is usually a short-term option. If the mounting surface gets sprayed or the boat runs in heavy chop, plan on stowing the unit or switching to a fixed, screw-down mount for longer runs.\u003c\/p\u003e\u003cp\u003eThis mount is a good match for boaters who want a removable setup for dockside planning, occasional trips, or bringing a portable navigator aboard without committing to holes in the dash.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269300678837,"sku":"QBP341125","price":13.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299160_qbp341125.jpg?v=1771543150","url":"https:\/\/www.qualityboatparts.com\/products\/qbp341125","provider":"Quality Boat Parts","version":"1.0","type":"link"}