{"product_id":"qbp334379","title":"Garmin USB Bare Wire Power Cable, For Approach Series, GLO, GTU 10, 8-58V Input, 5V 500mA Output","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11131-10 is a hard-wire USB power cable for running compatible Garmin portable devices from a boat’s DC supply, taking 8 to 58 V DC input and outputting 5 V at 500 mA. It’s a practical way to keep a small GPS receiver or tracker powered at the helm or nav station without relying on a plug-in adapter that can loosen up in chop.\u003c\/p\u003e\u003cp\u003eThis cable is commonly used with Garmin Approach handhelds (including G3, G5, G6, and G7), the GLO GPS receiver, and the GTU 10 tracker. One end connects to the device via USB, and the power end uses bare-wire leads so you can tie it into a fused circuit.\u003c\/p\u003e\u003cp\u003eThe wide input range covers typical 12 V and 24 V onboard systems, which makes it easy to integrate on anything from a small center console to a larger cruising boat with a higher-voltage house bank.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e8 to 58 V DC input range for direct connection to common 12 V and 24 V boat systems\u003c\/li\u003e\n\u003cli\u003e5 V output at 500 mA for steady USB power to compatible Garmin devices\u003c\/li\u003e\n\u003cli\u003eBare-wire leads for clean integration to a switched, fused circuit at the helm or distribution panel\u003c\/li\u003e\n\u003cli\u003eEliminates the need for a cigarette-lighter style adapter in permanent installs\u003c\/li\u003e\n\u003cli\u003eUseful for devices that need continuous power during long runs, storage tracking, or all-day tablet navigation setups\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eConfirm your device is in the supported family before ordering, including Garmin Approach handhelds (G3, G5, G6, and G7), Garmin GLO, and GTU 10. Also verify the USB connector at the device end matches your unit’s port style, since Garmin has used different USB form factors across product generations.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eFor a tidy marine install, connect the bare-wire leads to a switched DC feed so the device powers down with the boat, or to an always-on circuit if you need continuous operation. Protect the circuit with an appropriately sized fuse or breaker close to the power source, and use marine-grade splices with heat-shrink to keep moisture out.\u003c\/p\u003e\u003cp\u003eRoute the cable where it won’t chafe on sharp fiberglass edges or rest against hot surfaces, and add strain relief near the device so vibration does not work the connector loose over time. Keep any conversion module or junction point in a dry location above potential bilge water.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eUSB power cable with bare-wire input leads\u003c\/li\u003e\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52268981420213,"sku":"QBP334379","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298819_qbp334379.jpg?v=1771541259","url":"https:\/\/www.qualityboatparts.com\/products\/qbp334379","provider":"Quality Boat Parts","version":"1.0","type":"link"}