{"product_id":"qbp322811","title":"Jabsco Pumpguard In-Line Strainer, 1\/2 in NPT, Stainless Mesh Screen, Clear Inspection Cover","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Jabsco 36400-0000 is an in-line Pumpgard strainer for 1\/2 inch pump intake lines. It uses a stainless mesh screen inside a clear housing, so you can catch rust, scale, and tank debris before it reaches the pump, while still being able to see when the screen needs cleaning.\u003c\/p\u003e\u003cp\u003eThis strainer is fitted with 1\/2 inch hose barb ports and a 40 mesh screen. Its compact body measures about 4 inches long, 3 inches wide, and 3-1\/2 inches high, which makes it easy to place upstream of a pressure water pump where access for inspection and cleaning still matters.\u003c\/p\u003e\u003cp\u003eOn a boat, it is a straightforward way to protect pump valves and reduce the kind of contamination that can shorten pump life or cause erratic flow. The housing can be installed in any position before the pump, which helps when space around tanks, lockers, or service compartments is tight.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1\/2 inch hose barb ports for in-line installation on common pump intake hoses\u003c\/li\u003e\n\u003cli\u003e40 mesh stainless screen helps stop fine debris before it reaches the pump\u003c\/li\u003e\n\u003cli\u003eClear screw-off housing lets you inspect the screen and clean it without much downtime\u003c\/li\u003e\n\u003cli\u003eCan be mounted in any position ahead of the pump to suit tight plumbing runs\u003c\/li\u003e\n\u003cli\u003eCompact size at about 4 inches long, 3 inches wide, and 3-1\/2 inches high\u003c\/li\u003e\n\u003cli\u003ePlastic body with stainless screen for wet service in onboard water systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis unit is installed on the suction side of the pump, between the water source and the pump inlet. For the easiest servicing, place it where the bowl can be seen and unscrewed without having to remove nearby hose runs or equipment.\u003c\/p\u003e\u003cp\u003eBecause it uses 1\/2 inch hose barb connections, it is best matched to systems already plumbed with 1\/2 inch hose. It is a practical fit for freshwater pressure pump setups where small particles from the tank or plumbing can travel downstream and reach the pump head.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis strainer makes sense for boats with pressurized freshwater systems, especially where the pump draws from a tank that may carry scale, rust, or sediment after layup, tank work, or hose replacement. It is also useful in service areas where a quick visual check matters more than hiding the component out of sight.\u003c\/p\u003e\u003cp\u003eFor buyers comparing strainers, the main point here is the fine 40 mesh screen and the 1\/2 inch hose size. That makes it a better match for cleaner water circuits where pump protection is the priority and where routine inspection is part of normal maintenance.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eThe clear bowl makes it easy to spot buildup before flow starts to suffer. Regular cleaning is simple: shut the system down, relieve pressure if needed, remove the bowl, rinse the screen, and reinstall it so the pump is not pulling debris back into the line.\u003c\/p\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":52023989567669,"sku":"QBP322811","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330048_qbp322811.jpg?v=1780192073","url":"https:\/\/www.qualityboatparts.com\/products\/qbp322811","provider":"Quality Boat Parts","version":"1.0","type":"link"}